The PowerStop Z36-2490 is a front brake pad set for Ford F-250 and F-350 Super Duty trucks. It uses a carbon-fiber ceramic compound that the manufacturer positions as severe-duty stopping power for trucks and 4x4s, with a low-dust formula meant to keep wheels cleaner than factory pads. The set ships with premium stainless-steel hardware and hi-temp brake lubricant, so the install is complete in one box. Owners on user forums commonly describe much less wheel dust and more confident braking when towing, though reports on noise and dust vary by owner.
Fitment is the first thing to verify. Model-year coverage for this part is listed differently across sources, so confirm your exact truck (year, cab, 4WD configuration, and wheel setup) against the manufacturer's fitment data before ordering. Plan to bed the pads properly. The manufacturer describes five moderate-to-aggressive stops from 40 mph down to 10 mph in rapid succession, without letting the brakes cool and without coming to a complete stop. Search terms buyers use for this item include Z36-2490 front brake pads, F-250 Super Duty carbon ceramic pads, F-350 towing brake pads, low dust ceramic pads for Super Duty, and Power Stop Z36 truck and tow pads.
The manufacturer lists premium hardware and hi-temp brake lubricant as part of the Z36 pad package. The manufacturer also offers Z36 pads paired with drilled and slotted rotors as a separate upgrade kit, so check whether you want pads only or the full kit.
The manufacturer's bedding guidance calls for five moderate-to-aggressive stops from 40 mph down to 10 mph in rapid succession, without letting the brakes cool. The manufacturer advises against coming to a complete stop during this procedure. If a full stop is unavoidable, follow the manufacturer's remaining instructions for that situation.
Owners on user forums generally report low dust and quiet operation after break-in. Some owners report a short period of noise after installation that cleared on its own, and others report more dust than expected. Results vary, so confirm expectations with the manufacturer.
Replacing front pads on these trucks is a practical DIY job for someone comfortable with a jack, jack stands, and basic brake work. The manufacturer's install guidance lists brake fluid specified in the owner's manual, brake component lube, a caliper piston compressor or C-clamp, a jack and jack stands rated for the truck's weight, wheel chocks, and safety glasses and gloves. Before removing the rotor, check for retaining screws that hold it to the hub, and expect a rusted rotor to need a few firm mallet taps. The new pads are thicker, so push the caliper piston back into its bore before fitting them. Apply brake lube only to the backing where the pads contact the caliper, and keep it off the friction surface. Torque the caliper bracket bolts to the manufacturer's specified values. Owners on user forums also recommend lubricating the metal clips and the sliding pins, since neglecting them is a common cause of noise.