Free Shipping on Orders Over $99  ·  No Code Needed

Power Stop 2013 Acura ILX Front Z23 Evolution Sport Brake Kit

*Photo may not represent actual product

The Power Stop K6490 is a front-axle brake upgrade from the brand's Z23 Evolution Sport line, built as a pad-and-rotor package for the 2013 Acura ILX. The Z23 pads use a carbon-fiber ceramic compound designed to throw off less brake dust than conventional pads, and the manufacturer positions the set as a daily-driver upgrade that adds stopping power without sacrificing comfort. Stainless-steel hardware is packaged with the kit, which saves a separate parts run when your stock components are due for replacement anyway.

Against a cheaper set of generic pads, the case for this kit rests on the pad compound and rotor design rather than dramatic stopping-distance gains. Owners on user forums note that cross-drilling and slotting on their own add little measurable braking benefit, so the real payoff is quieter operation, cleaner wheels and a pad that stays composed in regular driving. Before ordering, confirm your vehicle matches the 2013 Acura ILX application and check the included hardware against your current setup.

  • Part Number: K6490
  • Axle Position: Front
  • Application: 2013 Acura ILX
  • Pad Compound: Z23 carbon-fiber ceramic
  • Rotor Style: Drilled and slotted
  • Hardware: Stainless steel

FAQ:

Do the pads need a break-in before normal driving?

Yes. The manufacturer's break-in routine begins with a series of firm slowdowns between 40 and 10 mph, made back to back so the brakes stay hot. It then continues with moderate stops from 35 to 5 mph and a cooling stage, and the manufacturer notes that a faint resin smell during the process is expected.

Will drilled and slotted rotors noticeably shorten stopping distance?

Owners on user forums generally say the cross-drilling and slotting mainly change appearance and help clear debris from the pad surface, while measurable stopping gains come mostly from the pad compound. Results will vary with driving style and conditions.

Installing it yourself

This is a bolt-on front pad-and-rotor swap for a home mechanic with a jack, jack stands, a lug wrench, a C-clamp, a torque wrench, brake grease and fresh brake fluid of the DOT 3 or 4 type your owner's manual calls for. Per the manufacturer's install guidance for comparable Z23 kits, loosen the lug nuts before lifting, support the car on the recommended lift points, and set the caliper aside by its hose so it does not dangle. Apply brake grease only where the pad backing plate contacts the caliper bracket, never on the friction surface, and check rotor runout before mounting since excess runout can cause pulsation. Improper hardware can cause noise or poor pad performance, so use the included stainless parts. Finish by bleeding the system until fluid runs clean and the reservoir sits at the MAX line. Avoid holding the pedal down on hot new rotors during bedding, because that can imprint pad material and contribute to judder.

  • MPN: K6490
  • Manufactured by: PowerStop
  • Units per SKU: 1
  • In Stock: 1
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$189.99

MSRP / List price
Member Price
Your price after signing in
$189.99
Only 1 left in stock — order soon
Add to Cart:
MPN
K6490
Manufacturer
PowerStop
Availability
Only 1 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout