The Power Stop K2977 is a rear-axle brake upgrade kit from the Z23 Evolution Sport line, built for the 2006 Lexus GS300. It packages carbon-fiber ceramic pads, drilled and slotted zinc-plated iron rotors, and premium stainless-steel hardware into one bolt-on set, so you don't have to source each component separately. The manufacturer's product description also highlights rubberized shims for quieter operation.
Compared with worn factory rear pads and rotors, this kit targets stopping power and longevity for daily driving and spirited weekend use. The manufacturer positions the carbon-fiber ceramic compound as a stopping-power upgrade over OE pads, and the zinc plating is intended to resist rust and corrosion on the rotor faces. Because the kit ships without calipers, it suits a GS300 with healthy rear calipers, avoiding the added cost of the caliper-inclusive version the manufacturer also sells. Search terms this kit answers include 2006 Lexus GS300 rear brake pad and rotor kit, Z23 carbon ceramic rear brake kit, and drilled slotted rear rotors GS300.
No. Per the manufacturer, the Z23 Evolution Sport line also includes a version with powder-coated calipers, which is sold separately from this pad, rotor, and hardware kit.
Yes. The manufacturer calls break-in critical, describing a series of moderate-to-aggressive stops without coming to a full stop, followed by a cooling drive. The manufacturer notes that proper pad bedding helps prevent rotor warping, and owners on user forums report that skipping bedding can leave pad noise that lingers.
This is a manageable weekend job for a home mechanic with basic hand tools. Expect to need a floor jack and jack stands, a C-clamp for retracting the caliper piston, brake pad grease, a torque wrench, and fresh DOT 3 or DOT 4 brake fluid if the caliper is opened. Lift the car on stands, remove the wheel, detach the caliper and hang it from the chassis without stressing the brake hose, then swap the rotor and pads. Apply grease only to the pad abutment edges, never the friction surface. Once assembled, follow the manufacturer's break-in procedure to seat the new pads on the rotors and avoid vibration.