The PowerStop K8656-36 is a rear Z36 Truck & Tow brake upgrade kit for the Mercedes-Benz Sprinter 2500. It pairs the manufacturer's carbon-fiber ceramic Z36 pads with drilled and slotted rear rotors. The manufacturer says the formula is built for severe-duty stopping power, and the drilled and slotted rotors are meant to keep brake temperatures down on long grades. Compared with stock pads and rotors, this kit is aimed at owners who tow, haul, or drive mountain roads, where fade and heat are the real limits. It is a pad-and-rotor kit, not a caliper replacement.
Fitment is the first thing to verify. Application listings disagree on model years and on whether the rear parking brake is manual or electric, so confirm your Sprinter's configuration with the manufacturer before ordering. The bolt-on design uses the factory mounting locations. Owners on user forums report that a piston compressor helps when rear pistons need to be rotated back, and they recommend cleaning the rotor hat and mating surfaces thoroughly before installing new parts. Bed the pads in with the manufacturer's break-in routine. Searches for "Sprinter 2500 rear Z36 brake kit," "drilled slotted rotor ceramic pad upgrade," and "Sprinter tow brake upgrade" will match this kit.
No. The manufacturer offers a separate version of the Z36 kit with powder-coated calipers, so check which kit you are ordering before you buy.
The manufacturer specifies five moderate to aggressive stops from 40 mph down to 10 mph in rapid succession, without coming to a complete stop. After that, drive for about five minutes at moderate speed so the pads can cool and cure. Never cool the brakes with water.
Rear pad and rotor replacement is a moderate DIY job for someone comfortable with a floor jack, jack stands, and basic hand tools. Plan on wheel chocks, a socket set, a C-clamp or piston compressor, brake component grease, and brake fluid that matches your owner's manual. The manufacturer's install guide calls for never letting the caliper hang from the brake hose, and for torquing caliper bolts to the vehicle specification. The guide also advises checking rotor runout when new rotors go on. Confirm the parking brake type first, since the mechanism on the rear caliper varies by configuration.