Free Shipping on Orders Over $99  ·  No Code Needed

Power Stop 1997 Acura CL Front Z23 Evolution Sport Brake Kit

*Photo may not represent actual product

The K697 is a front-axle upgrade from Power Stop's Z23 Evolution Sport line, built around carbon-fiber ceramic pads that are matched to drilled and slotted rotors. These pads combine with Drilled & Slotted rotors to ensure a cool ride, and the kit ships as one set so the friction pairing is engineered together. Power Stop positions the carbon-fiber-infused ceramic compound as resistant to fade at higher temperatures than OE pads. Compared with stock pads, the manufacturer also highlights a low-dust formula, which keeps wheels cleaner. The kit also includes premium stainless-steel hardware, so you are not sourcing mismatched rotors, pads, and clips separately, which is the main reason to spend more than you would on a pad-only swap.

Fitment is listed for the 1997 Acura CL Base and Premium coupes, which are four-cylinder cars, and listings for Honda Accord applications vary, so confirm your submodel and fitment with the manufacturer before ordering. Break-in matters for this kit: the manufacturer calls for five firm stops from 40 mph down to 10 mph without letting the brakes cool, followed by five moderate stops from 35 mph to 5 mph. Owners on user forums describe a DIY pad and rotor swap taking a couple of hours, and suggest keeping the brake bleed as a separate job, since doing both at once is awkward. Long-tail searches this kit answers include 1997 Acura CL front brake upgrade, carbon ceramic pads with drilled slotted rotors, and Z23 Evolution Sport bolt-on brake kit.

  • Manufacturer Part Number: K697
  • Axle Position: Front
  • Vehicle Fitment: 1997 Acura CL Base and Premium (confirm submodel with the manufacturer)
  • Pad Material: Carbon-fiber ceramic (Z23 Evolution Sport)
  • Rotor Style: Drilled and slotted
  • Kit Contents: Brake pads, drilled and slotted rotors, stainless-steel hardware
  • Break-In: Required, two-stage bedding procedure

FAQ:

Is a break-in procedure required before driving normally?

Yes. The manufacturer specifies five moderate-to-aggressive stops from 40 mph to 10 mph in rapid succession without letting the brakes cool and without coming to a complete stop, followed by five moderate stops from 35 mph to 5 mph. Expect a resin smell as the brakes heat up, and if you are forced to stop during the procedure, hold the car in park or leave room to roll rather than holding the pedal down.

Does the kit include the tools or grease needed for installation?

Owners on user forums report that the kit came with new hardware and brake grease, while a C-clamp and fresh brake fluid are still needed. The manufacturer's install guidance calls for DOT 3 or 4 fluid, as specified in your vehicle's owner's manual.

Does this kit fit the Honda Accord as well?

Sources vary on Accord applications, so details differ. Confirm the exact year, submodel, and engine with the manufacturer before ordering.

Installing it yourself

This is a bolt-on front brake job that a home mechanic with basic tools can handle. The manufacturer's front brake install guide lists a C-clamp, brake grease, and the correct brake fluid as the essentials. Work with the parking brake set and the car in park, and avoid letting the caliper hang from the brake hose. Remount the caliper bracket to the spindle rather than the piston section, and lubricate the edges of the pad backing plates where they contact the bracket. The manufacturer recommends checking rotor runout on new rotors, because excess runout causes pulsation. Finish by bleeding the system, keeping the fluid topped up to the MAX line, and then complete the break-in before normal driving. Owners on user forums suggest bleeding in a separate session from the pad swap to avoid juggling both tasks at once.

  • MPN: K697
  • Manufactured by: PowerStop
  • Units per SKU: 1
  • In Stock: 1
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$143.06

MSRP / List price
Member Price
Your price after signing in
$143.06
Only 1 left in stock — order soon
Add to Cart:
MPN
K697
Manufacturer
PowerStop
Availability
Only 1 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout