Free Shipping on Orders Over $99  ·  No Code Needed

Power Stop 18-21 Jeep Grand Cherokee Rear Z26 Street Brake Kit

*Photo may not represent actual product

The PowerStop Z26 Street Warrior Rear Brake Kit (K8758-26) pairs drilled and slotted rear rotors with carbon-fiber ceramic pads and stainless-steel hardware, so the rear axle can be upgraded in one purchase. The manufacturer recommends the Z26 Street Warrior kit for high-horsepower and modified muscle cars that need shorter stops. Compared with stock rear pads and rotors, it is a practical step up for owners who want stronger, more predictable rear braking on hard street stops or occasional track days. Owners on user forums say the low-dust ceramic formula keeps wheels cleaner than stock pads. Search terms this kit matches include 2018-2021 Jeep Grand Cherokee Trackhawk rear brake upgrade, carbon-fiber ceramic rear pads, and drilled slotted rear rotors.

Owners on user forums report installing this rear kit on 2018 Grand Cherokee Trackhawk models, and one reported a noticeable stopping-power gain over used OEM rotors with these pads. Confirm your exact trim and rear rotor setup against the manufacturer's fitment guide before ordering, because the kit covers the rear axle only. Buyers who want front Trackhawk rotors will need a separate purchase, since owners on user forums say PowerStop front rotors for this vehicle were hard to find. Expect a standard rear brake job: jack stands, a torque wrench, and careful handling of the caliper and brake hose. The manufacturer's break-in routine matters for a good result, so plan to complete it after installation.

  • Manufacturer Part Number: K8758-26 (Z26 Street Warrior Rear Brake Kit)
  • Axle Position: Rear
  • Rotor Type: Drilled and slotted
  • Pad Compound: Carbon-fiber ceramic
  • Hardware: Stainless-steel installation hardware included
  • Kit Contents: Rear rotors, rear brake pads, and installation hardware
  • Vehicle Application: 2018-2021 Jeep Grand Cherokee WK2, SRT and Trackhawk trims (confirm before ordering)

FAQ:

Do the rotors need replacing every time I change the pads?

Opinions vary. Owners on user forums say rotors that are not warped and do not cause pedal or steering pulsation can often be reused with new pads, while others replace rotors and pads together so the new pads bed in properly. Measure rotor thickness with a caliper and confirm wear limits with the manufacturer before deciding.

How should I break in the new pads and rotors?

The manufacturer calls break-in critical for performance. Make five moderate-to-aggressive stops from 40 mph down to 10 mph without letting the brakes cool or coming to a complete stop, then follow with five moderate stops from 35 mph to 5 mph. Avoid holding the pedal down while the rotors are hot, because that can imprint the pad onto the rotor and contribute to brake judder.

Does this kit include front brakes?

No. This is a rear-only kit. Owners on user forums report that they could only locate PowerStop rotors for the rear of the Trackhawk, so front components need to be sourced separately.

Installing it yourself

This is a rear brake pad and rotor replacement that suits a home mechanic with basic tools and experience. Use jack stands rated for the vehicle, a torque wrench for the caliper bracket and wheel fasteners, and a C-clamp or caliper tool to retract the piston. Keep the caliper supported so it does not hang from the brake hose, and clean the new rotors with brake cleaner before mounting. Check rotor runout, since excess runout can cause pulsation. Bleed the brakes if any line was opened or a bleeder was loosened, and make sure the fluid is full before pumping the pedal. Apply the brake lubricant to the pad contact points and use the supplied hardware, because the wrong hardware can cause noise. Finish with the manufacturer's break-in procedure.

  • MPN: K8758-26
  • Manufactured by: PowerStop
  • Units per SKU: 1
  • In Stock: 1, On Order: 2
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$362.91

MSRP / List price
Member Price
Your price after signing in
$362.91
Only 1 left in stock — order soon
Add to Cart:
MPN
K8758-26
Manufacturer
PowerStop
Availability
Only 1 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout