The Power Stop Z23 Evolution Sport front kit pairs carbon-fiber ceramic brake pads with drilled and slotted, silver zinc plated rotors and stainless-steel hardware, so the pads and rotors are matched as a set. Compared with stock brakes, the ceramic pads produce less visible dust and run quieter thanks to their rubberized shims and chamfered, slotted design. The zinc plating resists rust on the rotor faces, and the beveled drilled holes and rounded slots help shed heat and debris during repeated stops. Buying the pads and rotors together avoids mixing parts from different lines, and the kit is a reasonable choice for a daily-driven Crosstrek that sees occasional spirited or track-day use. Search terms this kit matches include Crosstrek front brake upgrade kit, Z23 carbon ceramic pads, drilled slotted rotors Crosstrek, and 2018 2019 Crosstrek brake pads and rotors.
This is a front-axle-only kit and is designed as a bolt-on replacement for the stock front brakes with no modifications needed. Confirm your exact model year against your VIN before ordering, since published fitment ranges for this part vary. Owners on user forums say the Crosstrek is one of the easier cars to service brake pads on, and they report changing the pads in under an hour with a single jack. Forum members also recommend following the bedding procedure in the included instructions and lubricating the contact points as described in Subaru's guidance on pad replacement. Rotors can sometimes stick to the hub, and owners say two 10mm bolts threaded into the rotor's jacking holes can press it free.
Published fitment ranges differ, and the product title lists 2018–2019 Crosstrek. Confirm your model year and trim against your VIN with the manufacturer before ordering.
Owners on user forums say they followed the bedding procedure included with the kit, and that new pads and rotors should be broken in with gentle stops before any hard braking.
Owners on user forums report that the Crosstrek rotor has two threaded 10mm holes near the center, and that two 10mm bolts turned into those holes can press the rotor off the hub.
This is a manageable weekend job for a home mechanic with a jack, jack stands, a lug wrench, a torque wrench, and a C-clamp or caliper tool for pushing the piston back. Work on one side at a time so you can use the untouched side as a reference. Clean the hub face and apply the high-temperature brake lubricant to the contact points and pin hardware, and do not get lubricant on the pad friction surfaces. Torque the caliper bracket and lug nuts to the Subaru specifications, and bed in the pads with progressive stops after the first drive.