The Power Stop K7725 is a rear-axle brake upgrade kit from PowerStop, built around its Z23 Evolution Sport formula. The kit includes two drilled and slotted rear rotors, one set of Z23 carbon-fiber ceramic pads, stainless-steel installation hardware, and high-temperature brake lubricant, so the whole rear axle can be refreshed in a single purchase. Compared with stock rear brakes, the pads are aimed at lower dust and quieter operation, and the drilled and slotted rotors are meant to vent heat and gas during repeated stops. Owners on user forums describe good price-to-performance for street use. Others report that the pads feel firm when cold and work best once they are fully hot, so this kit suits daily driving and spirited street or autocross use rather than full race duty.
Fitment is the first thing to verify. Listings disagree: the product name points to 2016-2019 Honda Civic models, while other listings extend coverage to 2021 by trim, so check your VIN against the manufacturer's fitment tool before ordering. This is a bolt-on job for a 10th-generation Civic rear end, and owners on user forums call it straightforward with a basic home tool kit and the right jack stands. For a proper bed-in, the manufacturer's Z23 procedure calls for five moderate stops from 35 mph to 5 mph in quick succession, followed by a cool-down drive of about five minutes. Search terms: 2016-2019 Civic rear brake kit, Z23 carbon ceramic rear pads, drilled slotted rear rotors, low-dust ceramic Civic brake upgrade.
Fitment information varies between listings. The product name refers to 2016-2019 Civic models, while other listings show coverage extending to 2021 depending on trim. Confirm your exact year and trim with the manufacturer's fitment lookup before buying.
According to the manufacturer's kit description, the package includes two rear drilled and slotted rotors, one rear Z23 carbon-fiber ceramic pad set, stainless-steel installation hardware, and high-temperature brake lubricant. Calipers are not included.
The manufacturer's Z23 guidance calls for five moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool, followed by about five minutes of moderate driving to cool down. You may notice a resin smell as the brakes heat up, which is expected. After the cool-down, normal use can resume.
Owners on user forums describe this as a straightforward rear brake job for someone comfortable with basic tools, though it still requires safe lifting and proper supports. Plan on a jack, rated jack stands, a lug wrench, a C-clamp or similar tool to retract the caliper piston, and brake grease for the pad backing-plate contact points. Keep the pad friction surfaces clean of grease, and check the rotor runout and thickness before reassembly. Confirm bolt torque values and any rear parking-brake service steps in the Civic service manual, since these were not confirmed during research. Plan on bleeding the brakes if the fluid level drops or the pedal feels soft after pressing the piston back.