The PowerStop K7295-26 is a front-axle Z26 Street Warrior brake kit for the sixth-generation Chevrolet Camaro. It combines drilled and slotted rotors with Z26 carbon-fiber ceramic brake pads, so one order covers the front pads and rotors. The kit is intended for street-driven muscle cars and modified Camaros that put more heat and horsepower through the brakes than the factory setup was designed for. Upgrading the front pads and rotors together is a practical step up from stock when you want shorter stops without moving to a full race system.
This kit is for Camaro LS and LT trims with single-piston front calipers. Camaro SS models with 4-piston front calipers need a different PowerStop kit. Published year coverage for this part is not consistent, so check your model year and caliper count before ordering. Searches for long-tail terms like "Camaro LS single piston front brake upgrade," "drilled slotted rotors Camaro LT," and "Z26 carbon ceramic pads 2016-2019 Camaro" should lead to this kit only when your caliper matches.
The manufacturer specifies 5 moderate to aggressive stops from 40 mph down to 10 mph without letting the brakes cool and without coming to a complete stop. It then calls for 5 moderate stops from 35 mph to 5 mph, also without letting the brakes cool. Proper bedding is tied to smoother, quieter braking, so skipping it is not recommended.
The manufacturer's install guide says new, thicker pads require the caliper piston to be pushed back into the caliper body. It recommends a piston compressor or a large C-clamp, with a used pad placed over the piston face to protect it from marring.
Installation involves removing the caliper, pushing the piston back, and reinstalling with fresh pads and rotors. The manufacturer's guide says to crack open the bleeder screw first so fluid can escape while the piston is retracted, and to close it again before reassembly. Use brake grease on the edges of the pad plates where they contact the caliper, and follow the manufacturer's lug nut torque and tightening sequence when you finish. Have a C-clamp or piston compressor, brake grease, and fresh brake fluid on hand. Complete the bedding procedure before driving hard.