The PowerStop K6562 is a rear-axle upgrade from the Z23 Evolution Sport line, pairing drilled and slotted rotors with carbon-fiber ceramic pads and stainless-steel hardware in one box. The manufacturer describes the pad compound as carbon-fiber reinforced ceramic, aimed at fade-resistant stopping and cleaner wheels. Carbon-fiber reinforced ceramic formula for superior, fade-free braking power and cleaner wheels. The kit also includes stainless-steel hardware and a pin bushing kit. Rounded rotor slots help keep a clear pad contact patch by clearing gas and debris (Wipes away gas and debris, keeping a clean contact patch for safe, smooth braking.). Compared with a pad-only swap, this matched rotor-and-pad package is the practical choice for a heavy SUV that sees daily commuting and occasional spirited driving. Fitment covers the rear axle of the 2015-2020 Cadillac Escalade and Escalade ESV, though year ranges differ between sources, so confirm your exact application before ordering. Search terms this kit targets include Escalade rear brake pad and rotor kit, carbon-fiber ceramic Escalade brakes, and K6562 drilled slotted rear upgrade.
For DIY owners, the manufacturer positions this as a bolt-on upgrade, with pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade. Bedding the new pads is the step that most affects results. The manufacturer's break-in procedure calls for five moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool, and you should expect a resin smell as the brakes heat up. After that, the manufacturer recommends a cooling drive of around five minutes at moderate speed without coming to a complete stop. Never cool the rotors with water, since the manufacturer warns that can damage them. Proper bedding also helps prevent rotor warping and judder.
The manufacturer describes this kit as pads, rotors, and premium stainless-steel hardware designed as a bolt-on upgrade. Calipers are not part of that description, so confirm the contents with the manufacturer if you need a caliper-equipped version.
Published fitment years are not consistent across sources, with some listings showing 2015-2019 and others 2015-2020 for the Escalade and Escalade ESV. Confirm your exact year, trim, and body style with the manufacturer before ordering.
Yes. The manufacturer's break-in procedure calls for five moderate stops from 35 mph to 5 mph, followed by a cooling drive, before normal use. Following it helps establish an even friction layer on the rotors.
The manufacturer presents this as a bolt-on upgrade that requires no modifications, so it suits a mechanic working in a familiar garage. Keep the bedding procedure in mind after installation: five moderate stops from 35 mph to 5 mph without letting the brakes cool, a resin smell is normal, and a cooling drive should follow. Avoid cooling the rotors with water, and avoid holding the pedal down while the rotors are hot, since that can imprint the pads and contribute to judder. Tool list and torque specifications were not confirmed in this research, so use the vehicle service manual for torque values.