The Wilwood Powerlite 120-8729 is a four-piston radial-mount caliper with 1.38-inch pistons, built for discs between .790 and .860 inch thick. The manufacturer's flyer lists a 5.08-inch mount center and uses the 7912 pad family, which keeps pad sourcing simple. Its forged aluminum body is designed for sports, rally, and off-road use, so it suits a lightweight track build where a stock floating caliper is too heavy or too flexible. Searches for a Wilwood Powerlite 1.38 four-piston radial caliper, 790 860 disc caliper, or 7912 pad caliper will point to this exact part.
The main reasons to choose it over stock or a cheaper no-name caliper are pad service and bridge durability. The manufacturer says its Quick-Clip pad retainers hold the pad from the top and allow pad changes without removing the caliper, which saves time at the track. Wilwood's SRS stainless bridge plates are meant to limit bridge wear from pad gouging and reduce the high-pitched four-pot squeal. Because the body is built for radial mounting and high temperatures, it is a practical upgrade for a racer who wants consistent pedal feel under repeated heavy braking.
The manufacturer lists compatibility with discs from .790 to .860 inch wide and from 9.45 to 11.00 inches in diameter. The manufacturer also notes the caliper fits inside many 13-inch wheel applications.
The manufacturer's part table assigns the 120-8726 to thinner discs, from .35 to .50 inch wide. The 120-8729 is the version for the thicker .79 to .86 inch range, and both use the same 1.38-inch bore.
Yes. The manufacturer states the Quick-Clip retainers allow pad access without removing the caliper from the car.
Because the caliper uses radial mounting, you will need to match the 5.08-inch mount center to your bracket before fitting it. The manufacturer's parts table lists the service items for this caliper: square ring 130-2658, bleed screw 220-6069, body seal 210-2582, bridge wear kit 300-5875, pad retainer 300-8697, and piston 200-8732 for the 1.38-inch bore. Pad changes can be done with the caliper still mounted thanks to the Quick-Clip design. Install difficulty, torque specifications, and bleeding procedure were not confirmed in research, so pull the manufacturer's install sheet before you start. Plan on a full brake bleed after any hydraulic work.