The Wilwood MC4 Mechanical Parking Brake Caliper in silver (part 120-12069) is a right-hand, cable-operated, single-piston caliper with a 1.19" aluminum piston, sized for 0.81" rotors. The manufacturer describes it as a multi-use unit for vehicles that need a separate, mechanically actuated parking brake, so it suits a dedicated mechanical park brake on a track or performance build. The die-cast body and forged billet anvil keep it light, at roughly 3.3 lb with pads, while the steel mounting bracket handles the load.
Compared with a stock or basic cable setup, this caliper ships with Composite Metallic high-friction pads that the manufacturer rates for high static hold, along with pre-fitted noise-dampening shields for quiet, rattle-free operation. The high-gloss, high-temp, brake-fluid-resistant silver powder coat holds up better around hot brake components than a bare finish. Search terms this part matches include right hand mechanical parking brake caliper 0.81 rotor, 1.19 piston cable park brake caliper, and separate mechanical e-brake caliper silver. Its lever accepts a .310" barrel-ended parking brake cable and can be clocked in three positions for cable routing, and a square ring rebuild kit (130-4320) is available for seal refreshes.
The manufacturer lists 120-12069 as the right-hand silver caliper. The left-hand silver version is 120-12070, and black and red right-hand versions are also available under 120-12069-BK and 120-12069-RD.
The manufacturer specifies that the mechanical lever accepts a .310" diameter barrel-ended parking brake cable, and each caliper includes a cable return spring.
The manufacturer offers a Caliper Square Ring Kit (130-4320), sold in a 4-pack, with a 1.000 in inside diameter dimension listed for the seal.
The lever can be clocked to one of three positions, so you can line up the cable path before you tighten anything. Use a barrel-ended cable with a .310" fitting, and confirm that the cable length and routing clear suspension and chassis parts. Pad and seal replacement are the main maintenance tasks, and the square ring kit covers the seals. The manufacturer's install sheet should be checked for torque specs, bracket hardware, and mounting details. Install difficulty and required tools are not confirmed in this listing.