The Wilwood Caliper-MC4 Mechanical in red, right-hand configuration (120-12069-RD), is a single-piston, cable-operated parking brake caliper for a 1.19" piston and a 0.81" rotor. The caliper's lever cartridge can be clocked in three positions for cable routing. The body combines die-cast and forged aluminum calipers with a steel mounting bracket, and the manufacturer lists it at about 3 pounds. It suits a separate, mechanically actuated parking brake on a rod-and-cable or classic build, where a hydraulic main-caliper setup needs an independent hold function.
Compared with generic parking brake hardware, this caliper's advantage is a purpose-built design: a dust boot on the piston keeps moisture and debris out, and the manufacturer describes a noise-dampening design for quiet, rattle-free operation. Wilwood also positions the MC4 as the mechanical companion for its fixed 4 piston main calipers in the Dynalite rear parking brake kit. Pad compound details vary between sources, so confirm the pad type with the manufacturer before ordering if pad specification matters to your build. Search terms for this part include red right hand MC4 parking brake caliper, 1.19 piston 0.81 rotor mechanical caliper, cable-operated rear parking brake caliper, and Wilwood Dynalite parking brake conversion.
The manufacturer states the mechanical lever accepts a .310" diameter barrel-ended parking brake cable, so confirm your cable end style and diameter match before installation.
The manufacturer lists 120-12069-RD as the red right-hand caliper. The left-hand counterpart is 120-12070, which is offered in the same finishes.
Per the manufacturer, the lever cartridge rotates to three positions, so you can orient it to suit your cable run before tightening. Each caliper ships with a cable return spring, so check that the spring is seated correctly when you connect the cable. Pads are supplied pre-fitted with noise-canceling shields, which helps reduce rattle after installation. Confirm the mounting bracket and rotor fit for your application with the manufacturer, since mount center and installation difficulty were not confirmed in the manufacturer literature reviewed.