Free Shipping on Orders Over $99  ·  No Code Needed

H&R Wheel Bolts 14 X 1.5 / Length 43mm / Tapered / Head 17mm - Black - Set of 10

*Photo may not represent actual product

The H&R 1454301SW SET is a ten-bolt pack with a 14 x 1.5 thread, a 43mm length, a 60° tapered seat, a 17mm hex head and a black finish, priced at 44.50 per box of ten in the manufacturer's catalog. These are extended wheel bolts for running wheel spacers, where a factory bolt is too short to clamp the wheel through the spacer and into the hub. New bolts must be longer than the original bolts by the width of the wheel spacer used. Buying the H&R set over a generic bolt of similar length makes sense because the seat and thread geometry are specified, not guessed. The bolt head must be identical to the existing bolt, and the 60° taper is the end-digit 01 style.

Thread engagement is the safety margin that matters most on a spacer install. The manufacturer's guidance puts M14 x 1.50 at 7.5 turns, approximately 12 mm of load-bearing shaft length, which is the number to check before you torque the wheel down. Owners on user forums who size these bolts generally go about 1mm over what they calculate, since a slightly long bolt is less likely to bottom out than a short one. Search terms this part answers include M14x1.5 extended lug bolts, 43mm tapered black wheel bolts, and H&R spacer bolt set. Confirm the seat type and length against your own hub before ordering, because the spacer, not the bolt, determines the final length.

  • Thread Size: 14 x 1.5 (M14 x 1.5)
  • Thread/Shank Length: 43mm
  • Seat Type: Tapered, 60°
  • Head Size: 17mm hex
  • Finish: Black
  • Quantity: Set of 10

FAQ:

How long should my bolt be when I add a wheel spacer?

The manufacturer says new bolts must run longer than your original bolts by the width of the spacer. Measure your stock bolt, add the spacer thickness, and compare that total to the 43mm length.

Is the tapered seat the right choice for my wheels?

The manufacturer says the bolt head must match the existing bolt. This 60° tapered version is distinct from H&R's VW/Audi ball-seat variant, which is a separate part number (1454303SW).

How much thread should be engaged with the hub?

Per the manufacturer's safety guidance, an M14 x 1.5 bolt needs about 7.5 turns of thread engagement, roughly 12 mm of load-bearing shaft length.

Installing it yourself

This is a moderate DIY job: the bolts themselves are simple, but the spacer fit determines whether the job goes smoothly. You will need a 17mm socket or wrench, a torque wrench, and the vehicle's wheel torque specification. Remove the wheel, fit the spacer, and thread the new bolts by hand first to avoid cross-threading. Before final torque, the manufacturer advises you to ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.), turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. Re-check the bolt length after installation, since a bolt that bottoms out or sits short can cause problems.

  • MPN: 1454301SW SET
  • Manufactured by: H&R
  • Units per SKU: 1
  • In Stock: 6, On Order: 1
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$44.50

MSRP / List price
Member Price
Your price after signing in
$44.50
In Stock — ships same day if ordered before 5pm PST
Add to Cart:
MPN
1454301SW SET
Manufacturer
H&R
Availability
In Stock (6)
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout