The Mishimoto MMTC-F150-04 is a silver, direct-fit transmission cooler for the 2004-2008 Ford F-150, Transmission Cooler, Silver, fits Ford F-150 2004-2008. Its efficient tube-and-fin cores use push-on fittings for a simple, leak-free installation. Owners on user forums argue that heat is the biggest threat to automatic transmissions, so a higher-capacity cooler is a sensible upgrade for anyone searching for a 2004 2005 2006 2007 2008 F-150 transmission cooler for towing or hauling.
Compared with a universal cooler, this kit asks less of the installer. It includes a trans cooler, 2x brackets, 4x M6 bolts, a transmission line, and a removal tool, so you are not sourcing brackets or hardware separately. The cooler carries the Mishimoto lifetime warranty, which covers every Mishimoto product, giving buyers of a towing-focused F-150 cooler upgrade a clear path if a defect appears.
The manufacturer lists the cooler as fitting the 2004-2008 Ford F-150. I could not confirm a trim-by-trim or engine-by-engine breakdown from the manufacturer's own pages, so check your VIN with the manufacturer before ordering.
The manufacturer's install steps remove the factory cooler and bolt the new unit in its place. Owners on user forums generally advise against bypassing the factory cooler when adding an aftermarket unit, so confirm with the manufacturer before deviating from the printed steps.
Owners on user forums report that rusted quick-connect fittings can resist the standard release tool, and one owner used a dedicated Lisle transmission cooler line tool. This kit ships with its own removal tool, which is designed for the fittings on the cooler.
The manufacturer's installation guide lists an install time of about 30 minutes. The tools called out include a pry bar, socket wrench, socket extension, 8mm and 10mm sockets, and a tree clip removal tool. Remove the three lower tree clips on the splash guard and move it out of the way. Then pop the hood and use the provided tool, wrap it around the lines, depress the fitting, and pull the line out, with a drain pan to catch any fluid. Remove the 2 bolts holding the transmission cooler to the vehicle, then bolt in the new transmission cooler. Attach the brackets to the new unit, tighten them, and insert the 2 transmission lines into the cooler. Expect the fittings to be the tricky part, since owners on user forums report that rusted quick-connects can be stubborn to release.