The Mishimoto MMTC-TAC-05 is a bolt-on transmission cooler kit for 2005-2011 Toyota Tacoma trucks. The tube-and-fin core uses densely packed internal fins to draw heat out of the fluid, with external fins that move that heat into the surrounding air. Mishimoto states the core has a 91-percent increase in core volume and a 225-percent increase in external fin area over the stock cooler. The kit also includes brackets, hoses, clamps, and hardware, so a Tacoma transmission cooler upgrade doesn't require sourcing parts separately.
Choose this kit over a generic universal cooler when the goal is a plug-and-play fit for a 2005-2011 Tacoma. Excess heat breaks down transmission fluid and reduces its lubricating ability, so extra cooling capacity matters most for towing, hauling, and steep grades. One owner on a user forum reported the truck shut down from transmission heat on a hill climb, then climbed the same grade with the gauge only a little above midway after adding a Mishimoto transmission cooler. The manufacturer lists the Tacoma model years covered and backs the kit with a Mishimoto Lifetime Warranty.
The manufacturer lists one transmission cooler, one mounting bracket set, two transmission cooler hoses, four worm gear clamps, mounting hardware, and the Mishimoto Lifetime Warranty.
The manufacturer rates the installation as easy and lists an install time of about two hours, using common hand tools such as a 1/4" ratchet, 10mm, 12mm, and 13mm sockets, a 10mm wrench, pliers, and a flathead screwdriver.
Per the manufacturer's install guide, the job starts by removing the two pop clips and two M6 bolts from the grill, then you loosen the spring clamps and disconnect the transmission cooler hoses. The final step is to remove the four M6 bolts holding the transmission cooler. The manufacturer advises raising the vehicle only on jack stands or a lift, letting it cool completely first, and disposing of fluids properly. Owners on user forums have described the job as manageable for a mechanically inclined DIYer, with one noting a mechanic found it pretty easy. Keep the hoses routed cleanly away from moving parts and the fan, and confirm the fit with the manufacturer's install sheet before you begin.