The Mishimoto Rear Recovery Points for the 2024+ Toyota Tacoma (MMTH-TAC-24-RRD, red) add a rear anchor to a truck that does not ship with rear recovery points from the factory. The hooks are forged alloy steel, which resists the bending and cracking that cast or stamped points can suffer under sudden loads. Corrosion protection is a two-stage system: an electrogalvanized base layer seals the forged steel before a powder coat topcoat is applied, which matters for owners running trails in salt or mud. The recovery hooks accept both d-ring and soft shackles, so you can match the rigging you already carry. Searching for a 2024 Tacoma rear tow hook, TRD Pro recovery point, or Trailhunter soft shackle mount? This is a bolt-on rear recovery point, not a welded or drilled one, and it is backed by Mishimoto's Lifetime Warranty.
Fitment is the first thing to verify. Listed fitment covers the 2024–2026 Tacoma Trailhunter, TRD Off-Road, and TRD Pro, so confirm your trim with the manufacturer before ordering if you have a different package. Installation is a bolt-on job: the part is direct fit for the 2024+ Toyota Tacoma with no drilling, cutting, or modification required. The hardware also matters for owners who want to keep their rear step. The kit includes the washers required to reinstall the factory OEM drop-down step, so cab access is not lost. Fasteners are black dacromet-coated, and bolt heads are recessed flush within the mount profile, which reduces hardware exposure on rocks and ledges.
No. The manufacturer's listing states the hardware kit includes the washers needed to reinstall the OEM drop-down step, so you can keep cab access while mounting the recovery point.
No. The manufacturer's listing describes a direct-fit installation with no drilling, cutting, or modification.
Listed fitment covers the 2024–2026 Tacoma Trailhunter, TRD Off-Road, and TRD Pro. For other trims, confirm compatibility with the manufacturer before ordering.
Because the mount is bolt-on with no cutting, this is a manageable project for a home mechanic with a standard socket set and a torque wrench. Before you start, check the included instructions for the torque value, since the manufacturer's torque spec for this specific part was not confirmed in our research. Set aside the factory drop-down step hardware, because the included washers are needed to reinstall it correctly. Keep the recessed bolts and dacromet fasteners in their original sequence, and confirm the hook clears your rigging before final tightening.