The Mishimoto Rear Recovery Points in black are a rear recovery mount for the 2024+ Toyota Tacoma, and the manufacturer's listing describes them as fitting 2024+ Toyota Tacoma models. The truck leaves the factory without a rear anchor. One owner on user forums noted not seeing any attachment points under the 2024 Tacoma, and another explained that these mounts bolt to the frame in various places. Without them, a rear recovery strap or shackle has nothing to connect to. Some owners on user forums point to a hitch-mounted recovery point as a lower-cost stopgap, but a frame-mounted point is the more direct way to get a rear recovery connection. Mishimoto warrants its products under a lifetime limited warranty policy, which adds long-term value to the purchase. Search terms: 2024 Tacoma rear recovery points black, 4th gen Tacoma frame recovery mount, 2024 Tacoma TRD Pro rear tow hook recovery.
Fitment is the first thing to confirm. The manufacturer lists the part for the 2024+ Tacoma, but product listings disagree about which trims are covered, so verify your specific trim with the manufacturer before ordering. Owners on user forums report that the factory bed step can cover one of the frame holes needed for mounting, so check your truck's frame before starting. Some owners also report needing aftermarket reinforcement sleeves at the frame mounting points, depending on the truck. For a clean install, a plastic trim tool helps remove the frame caps without breaking them, as one owner on user forums noted. Owners also stress that the mounting bolts must be torqued to spec before the points are used for any recovery.
The manufacturer lists fitment for the 2024+ Toyota Tacoma. Product listings differ on which trims are covered, so confirm your specific trim with the manufacturer before ordering.
Owners on user forums report that the 2024 Tacoma has no factory rear attachment points, and that aftermarket mounts bolt to the frame to provide one.
Owners on user forums report that some trucks needed aftermarket reinforcement sleeves at the frame mounting points, while others did not. Check your frame before installation.
Owners on user forums describe the install as fairly straightforward, with the main challenge being removal of the plastic frame caps. Use a plastic trim tool to avoid cracking them. Before mounting, check the frame holes and whether the factory bed step blocks one of them. The manufacturer's tow hook guide for its MMTH series calls for a 19mm wrench, with the shaft tightened to approximately 15 ft-lbs and not overtightened. Confirm the rear-specific torque value with the manufacturer before recovery use, since the tow hook guide is written for a different mounting arrangement.