The BAK Revolver X4s Hard Roll-Up Tonneau Cover (80135) is made for the 2019-2026 GMC Sierra 1500 with a 5'8" bed. It rolls back for full bed access and locks closed to protect what you carry.
The Revolver X4s is BAK's most secure do-it-all hard roll-up, with Level-3 slash resistance, a seamless matte vinyl surface and a low profile.
Low profile, tight seals. The cover sits nearly flush with the bed rails, and flush-fitting side seals plus an integrated bulkhead seal help keep water and dust out of the bed.
Quick to open. Roll the cover toward the cab with PrecisionRoll technology, strap it down with the integrated safety straps, and use the full bed with the rear window and factory cameras unobstructed.
Slash resistant and locked by default. Patented rotational locking rails and automatic slam latches work with the aluminum slat design to resist prying, slicing and forced entry.
Matte TriShield vinyl over a slat core. The 70-grade vinyl rides on interlocking aluminum slats that carry up to 400 lb evenly distributed, and the 360-degree matte black aluminum finish carries through the slats, clamps and hardware.
With a five-year limited warranty behind it, the BAK 80135 is a secure, full-access roll-up for your truck. Order it from Track Ready Products and match the bed length above before checkout.
The mounting is clamp-on with no drilling, the kit ships with the cover, and the install typically takes under an hour with hand tools.
Start with a clean set of rails. Position the cover, tighten the clamps evenly, and run it through a full open and close cycle to check that it moves freely and latches.
Care is simple: mild automotive soap and water for cleaning, a clamp check after about a week and periodically afterward, the cover secured whenever the truck is moving, and snow and ice cleared before you open it.
