226342 is the BAKFlip G2 Hard Folding Tonneau Cover sized for the 2024-2025 Ford Ranger and Ranger Raptor with a 5'1" bed. The hard panels protect your cargo from weather and prying eyes, and the folding design opens the bed in one move.
The BAKFlip G2 combines aluminum-skinned panels, EPDM perimeter seals and automatic slam latches in a cover that clamps on without drilling.
Ranger owners tend to use the bed for gear and projects alike, and a lockable cover keeps the load protected between trips.
Built to shed water. Precision-fit EPDM rubber seals run the perimeter, the hinges are rounded, and an integrated drainage system sends water away from the bed, which helps keep rain and wash-down spray outside.
Strength without the weight. Aircraft-grade aluminum skins over a solid core give the panels their rigidity, and the semi-gloss black powder coat stands up to fading and chipping. The low-profile fit looks clean on the truck, built-in struts keep the folded cover from rattling against the cab, and the load rating is 300 lb evenly distributed.
Full bed access without removing the cover. The panels fold forward against the cab, so you can drive with the bed open for tall or bulky cargo while the cover stays secured on the truck. Fold it back down and the bed is covered again in seconds.
It locks as you close it. BAK's patented rail and clamp system uses automatic slam latches, so each panel locks when it shuts. Close the tailgate, press the cover down, and your gear is out of sight and locked in.
If you want a hard cover that locks, seals and folds out of the way without a complicated install, the BAK 226342 is built for exactly that. It is assembled in the USA, carries a three-year limited warranty, and ships from Track Ready Products.
Plan on roughly 30 minutes with basic hand tools. The G2 clamps to the rails, so nothing gets drilled or cut and everything you need comes in the kit.
Wipe down the rails, seat the cover, then snug the clamps a little at a time on both sides so it pulls down square. Test the latch and the open and close action while the bed is still empty.
Care is simple: mild automotive soap and water for cleaning, a clamp check after about a week and periodically afterward, the cover secured whenever the truck is moving, and snow and ice cleared before you open it.
