The H&R 72053 is a matched pair of anti-roll bars for the E9X BMW M3 platform, with a 27mm front bar and a 23mm rear bar. It uses 50CrV4 steel, which is said to give faster response times and smooth transitional function. The kit includes Poly/Teflon bushings in most applications. A buyer should choose this over stock because larger bars increase roll stiffness, which reduces body roll, improves cornering performance, lateral grip, and stability. Owners on user forums say the rear bar in particular makes a noticeable difference on the S65 V8 cars, so the set is worth more than either bar alone.
Fitment is the main thing to verify before ordering. Listings show the S65-powered E92 M3 coupe, E90 M3 sedan, and E93 M3 convertible, along with the E82 1 Series M Coupe, but the listed model years vary by source, so confirm your exact year and body style with the manufacturer. The bushings are a urethane/Teflon composite that prevents squeaks and eliminates the need for lubrication. Owners on user forums warn that a rear bar swap usually requires dropping the rear subframe, so budget for the labor, and if your car is lowered, adjustable end links are needed or the bar will bind.
Owners on user forums report that the stock end links work with the M3 bar on a car at factory ride height. Owners who have lowered their cars say adjustable end links are needed to avoid binding.
Owners on user forums describe the rear bar as the more involved install. Access usually requires lowering the rear subframe, and some owners recommend a second person to help with the bar.
The front bar is generally considered the easier of the two installs and is often done first by owners on user forums. The rear bar is more involved because the rear subframe usually has to be lowered, with the exhaust and rear dampers out of the way, so plan for a longer job and a jack, jack stands, and E-Torx and metric sockets. Owners recommend a small amount of dish soap on the bushings during installation, since the bushings are designed to run dry and should not be heavily greased. Confirm the bar's orientation and end link length before final tightening.