The Öhlins 25633-13 is an aluminium ball-joint top mount with adjustable camber, sold individually for the front driver's-side position on the WRX STI. The manufacturer's Road & Track coilover line uses aluminium ball joint top mounts with adjustable camber at the front, and the manufacturer describes that platform as DFV technology with rebuildable construction and a 2 year warranty. Buyers running an Öhlins coilover kit, or planning one, get camber adjustment at the strut top without replacing the damper. Sources disagree on which years and chassis this mount covers, so confirm the fitment with the manufacturer before you order. Sites that list the mount also disagree on the year range, with some showing 2007-2014 GRB and others 2008-2021 GR/VA. For DIY work, the manufacturer's install sheet for the kit has you raise the vehicle and put it on jack stands and remove the front wheels. You then loosen the lower strut bolts, fit the lower bearing spacer, top mount, and top nut, and tighten the top nut to 35 - 40 Nm. Reconnect the brake hose and ABS bracket, and set the top mount to position 0 before final tightening. Search terms owners use include Öhlins WRX STI GR camber top mount, STI front strut top mount adjustable camber, and Öhlins Road and Track front top mount.
The manufacturer's kit install sheet specifies 35 to 40 Nm for the top nut. Confirm this value for the standalone top mount before final tightening.
Owners on user forums report that clunking they first blamed on worn bearings was traced to top nuts that had loosened slightly. Check nut torque before replacing parts.
Owners on user forums have described Öhlins spherical-bearing top hats as noisy on rough roads, and some have looked for alternatives. Experience varies by setup.
This is a front strut-top job that needs a jack, jack stands, a socket set, and a torque wrench. The manufacturer advises having an Öhlins dealer install shock absorbers, so consider a shop if you are not comfortable removing the strut assembly. Watch the ABS cable bracket and brake hose routing, since the install sheet calls for reattaching both. Set the top mount position as the instructions describe, and tighten the lower strut bolts only after checking for freeplay. Owners on user forums say the most common gotcha is a top nut that backs off, which causes clunking.