The Mishimoto MMOC-SP-LBK is a universal cross-flow, single-pass bar-and-plate oil cooler in large size and Stealth Black. Oil goes in one side and out the other, adding capacity to your oil system.
The 100 percent aluminum cooler has CNC end tanks, -10AN ports and welded M8 x 1.25 bungs for brackets. Plan on supplying your own brackets and lines.
A universal cooler fits whatever you build around it, so measure first. Find a spot with fresh airflow, such as behind the bumper opening or beside the radiator, leave room for the lines to make gentle bends, and check that the core clears suspension travel and steering. Plan on adding oil to cover the new cooler and lines, and check the level after the first heat cycle. Lines and fittings in the size shown in the specifications are needed to complete the circuit, and a thermostat is worth considering if you drive in cold weather so the oil still warms up quickly.
Add your own lines and brackets to build a front-mount setup. Pick up the Mishimoto MMOC-SP-LBK at Track Ready Products and give your drivetrain the cooling it has been missing.
Provide lines, fittings and brackets.
Use the M8 x 1.25 bungs for mounting.
Flush the new cooler with about a quart of clean oil before you plumb it in, so no manufacturing debris ends up in the engine.