The Squadron 2.0 Pro / S2 Pro / S2 SAE "Pro" fog pocket kit is built for the factory steel bumper on the 2021-2026 Ford Bronco and the 2022-2024 Bronco Raptor. Baja Designs positions it as a road-legal and trail setup in one package. The 2.0 revision adds clip-in reflectors that make lens swaps simpler, along with a redesigned gasket for better sealing against weather. Owners on user forums who compared the new generation with earlier Squadron units say the extra output is a welcome upgrade, and the manufacturer rates each 2.0 Pro light at 5,921 lumens per light at 65W. That is the main reason to choose this kit over stock fog lamps or a cheaper bolt-on pod set: more distance and a beam pattern built for trail use on a Bronco's front end.
For installers, the kit is designed as a complete package. It includes everything needed for a quick install and requires no additional parts. The lights are operated by your factory upfitter switches, so the wiring runs through the Bronco's existing upfitter setup rather than a separate switch panel. The manufacturer publishes install sheets for this family under part numbers 44-0084 and 44-0084-UP. Owners on user forums advise aiming each light so the top of the beam sits about 4 inches below level at 25 feet, and they caution against removing the bezel and reversing it, which they say can void the warranty. Searchers looking for a Bronco steel bumper fog light kit, a 2021-2026 Bronco upfitter LED kit, or a Squadron 2.0 Pro spot beam will find the key details here.
No. The manufacturer lists this kit for the factory steel bumper. The plastic-bumper version is a separate Baja Designs kit with its own part number.
The manufacturer states the kit includes everything needed for installation and does not require additional parts.
The manufacturer designed the 2.0 generation with clip-in reflectors for simpler lens swaps, and the 2.0 Pro offers a user-selectable backlight with nine colors.
The manufacturer specifies that the lights are operated by the Bronco's factory upfitter switches.
The manufacturer provides step-by-step install sheets for this kit family, including 44-0084-UP, so check the sheet for the exact tool list and wiring steps before you start. Because the kit runs off the factory upfitter switches, the job centers on mounting the lights in the fog pockets and connecting the harness, with no extra parts required. Owners on user forums recommend aiming the lights carefully after installation, with the top of the beam about 4 inches below level at 25 feet, and they advise leaving the lens and bezel assembly intact to protect the warranty.
