The Eibach E30-82-105-03-02 is a pair of rear coil springs for 2024–2026 Toyota Tacoma trucks, aimed at owners who want rear height and stance back. Eibach positions its heavy-duty tier as a drop-in alternative to standard PRO-LIFT-KIT rear springs, recommended for trucks with a rear swingout, metal rear bumper, rooftop tent, or other heavy rear accessories. The line draws on the brand's off-road racing background, which the manufacturer ties to its PRO-TRUCK-LIFT systems. Its selling point is the extra rate: HD rear springs have additional spring rate to lift your rig back up to its intended lift height after adding cargo and accessories. Owners on user forums with trailers say the rear sags badly when the trailer is hitched, which is the problem this spring targets.
Owner reports on user forums support the upgrade logic. One owner found the rear springs in a Stage 2 kit gave only around an inch of lift, so they bought heavier 2.2-inch springs to restore rake. The manufacturer's HD description says the springs are designed to retain up to 2 inches of lift height when a consistent weight range of 200-400lbs is added over the rear axle. Eibach specifies that these springs must be used with Eibach Pro-Truck Sport Rear Shocks. Plan the install as a spring-and-shock package, not a spring-only swap. Keyword focus: 2024-2026 Tacoma HD rear coil springs, Eibach Pro-Lift-Kit HD, Pro-Truck Sport rear shocks, Tacoma rear sag fix, rooftop tent rear lift springs.
The manufacturer states that these springs must be used with Eibach Pro-Truck Sport Rear Shocks.
The manufacturer describes the HD tier as a drop-in alternative for PRO-LIFT-KIT rear springs, and says the HD springs are compatible with PRO-LIFT-KIT and PRO-TRUCK-LIFT equipped vehicles.
The manufacturer's HD description says the springs hold close to 2 inches of height when 200 to 400 pounds sits over the rear axle. Exact height figures for this specific part number were not confirmed, so check with the manufacturer for final numbers.
Because this is a rear coil swap paired with new shocks, plan to safely support the rear axle, remove the old shocks and springs, and reinstall with the Pro-Truck Sport units. The manufacturer's install sheet should give the exact sequence and torque values; those specifics were not confirmed in research, so review that document before starting. Owners on user forums advise making sure the spring insulators are installed correctly so the spring sits like the factory unit. Owners on user forums have also reported a spring that looked bent or uneven after installation, so check spring seating and orientation before you lower the truck.