Free Shipping on Orders Over $99  ·  No Code Needed

Eibach 22-26 Toyota Tundra Crew Cab Rear Pro-Lift Springs - Pair

*Photo may not represent actual product

The Eibach E30-82-096-05-02 is the heavy-duty rear spring pair in Eibach's Pro-Lift line for 2022-2026 Toyota Tundra Crew Cab trucks. Instead of a generic coil, it is a load-oriented, drop-in rear spring meant for owners who tow, haul bed loads, or carry heavy accessories and want their lifted stance to hold. Eibach builds it in the USA, and it is designed to run with Eibach's Pro-Truck Sport rear shocks. Because it replaces the factory rear coils, it does not require airbags or spacer blocks.

Why choose this over the standard Pro-Lift rear springs or a spacer lift? The manufacturer positions this set for increased static weight over the rear axle, and owners on user forums often say the stock rear coils squat under a load. The manufacturer also notes that Eibach spring lifts keep full suspension travel without the added stress on bushings and ball joints that spacer lifts can introduce. Owners looking for Tundra rear lift springs for towing sag, 3.4L Tundra rear coil swap, or Pro-Truck Sport shock compatibility will find this part matches that search intent. Installation is a rear-only job, but it takes time and the right tools to do safely.

  • Manufacturer Part Number: E30-82-096-05-02
  • Application: 2022-2026 Toyota Tundra Crew Cab, 3.4L RWD (SR, SR5, Limited, Platinum trims per manufacturer listing)
  • Rear Lift: +1.5" (manufacturer listing; heights measured with 500 lb of extra weight)
  • Required Shocks: Eibach Pro-Truck Sport Rear Shocks
  • Set Contents: Pair of 2 rear springs (rear only)
  • Country of Manufacture: USA

FAQ:

Do these springs work with the factory rear shocks?

The manufacturer states these springs must be used with Eibach Pro-Truck Sport Rear Shocks. Pairing them with other shocks is not covered by the manufacturer's fitment guidance.

What is the difference between this part and the 1000 lb version?

The manufacturer lists a separate rear Pro-Lift HD part number, e30-82-096-06-02, with heights measured at 1000 lb of extra weight instead of 500 lb. Choose the one that matches the typical load your truck carries over the rear axle.

Should I run these springs at their maximum lift?

The manufacturer recommends running these springs at fully loaded height only, and warns that too much lift will cause poor ride quality.

Installing it yourself

Owners on user forums describe the rear coil swap on 3rd-generation Tundras as a moderate job that requires drooping the suspension, disconnecting or relocating components enough to drop the axle, and using a spring compressor for the coil. Plan on a floor jack, jack stands, a spring compressor, and a torque wrench. The manufacturer publishes installation instructions for Pro-Lift rear springs, so review them before you start. Check the shock pairing and recheck ride height after the install.

  • MPN: E30-82-096-05-02
  • Manufactured by: Eibach
  • Units per SKU: 1
  • On Order: 3
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$299.00

MSRP / List price
Member Price
Your price after signing in
$299.00
Add to Cart:
MPN
E30-82-096-05-02
Manufacturer
Eibach
Availability
Out of Stock
Ships Within
1–2 Business Days
Member Pricing
Easy Returns
Expert Support
Secure Checkout