Free Shipping on Orders Over $99  ·  No Code Needed

Eibach Wheel Stud M12 x 1.5 x 57mm

*Photo may not represent actual product

This Eibach M12 x 1.5 x 57 mm wheel stud is a replacement hub stud with a 12.4 mm knurl, the press-fit style that is sold by Eibach with a thread/length of M12x1,5x57 and a wrench-size knurl of 12.4. Because the knurl and length decide whether the stud seats correctly, matching them to the original stud is the first check before you buy. Stock studs cannot be stretched to clear a spacer, so a correctly sized extended stud is what keeps a spacer setup safe.

Eibach's spacer documentation states that original studs must be changed, and longer studs are included in its spacer kits. The manufacturer also advises buying wheel bolts or studs with extended length equivalent to the thickness of the wheel spacer. Buying the matched Eibach stud avoids guessing at seat and knurl on a generic extended bolt. Owners on user forums who installed an Eibach spacer kit described the included studs as high quality, and called the install straightforward.

  • Thread: M12 x 1.5
  • Overall length: 57 mm
  • Knurl diameter: 12.4 mm
  • Stud style: Press-in replacement stud
  • Fitment: Confirm knurl diameter and original stud length against the manufacturer's catalog before ordering

FAQ:

How do I know if the 12.4 mm knurl is the right size for my car?

The manufacturer recommends checking the knurl diameter of the original wheel studs on both axles before ordering, and states that other knurl sizes must be specified when ordering.

Do the original wheel studs need to come out when I fit a spacer?

Per the manufacturer's Pro-Spacer kit information, original studs must be changed, and the kit supplies longer studs to replace them.

How far should this stud thread into the hub?

The manufacturer's installation instructions call for an adequate minimum screw-in depth. For M12x1.5 studs, they specify about 6.5 turns, which corresponds to roughly 10 mm of thread support.

Installing it yourself

The manufacturer notes that pressing wheel studs into a hub requires special tools and skills, so this is not a bolt-in job for most home garages. Clean the hub center and the wheel's bearing surfaces with a wire brush first, taking care not to damage nearby components. Confirm the new stud is longer than the original by the spacer thickness, and torque the wheels to the workshop manual or wheel maker's specification. Owners on user forums have pulled stock studs out with a hammer and then drawn the new studs in using washers and a nut, so budget for proper pressing tools or a shop visit if you lack them.

  • MPN: S3-0-12-50-57-124
  • Manufactured by: Eibach
  • Units per SKU: 1
  • On Order: 5
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$7.00

MSRP / List price
Member Price
Your price after signing in
$7.00
Add to Cart:
MPN
S3-0-12-50-57-124
Manufacturer
Eibach
Availability
Out of Stock
Ships Within
1–2 Business Days
Member Pricing
Easy Returns
Expert Support
Secure Checkout