The PowerStop H759K is a disc brake hardware kit for 2003-2008 Dodge Ram 3500 trucks, built to refresh the clips, bushings, and fasteners that keep pads seated and sliding freely during a front or rear pad and rotor job. The manufacturer's brake kits typically include premium stainless steel hardware, a new pin bushing kit where applicable, and high-temperature brake lubricant. Reusing worn factory hardware can lead to sticking and rattling, so a stainless refresh is a practical step up from a bare pad swap, especially on a heavy-duty truck that tows or hauls. Stainless hardware also resists the corrosion that tends to seize fasteners on trucks driven in road-salt climates.
Application matters with this kit. Each of the manufacturer's hardware kits includes stainless steel abutment clips, anti-rattle clips, piston clips or bushings, and sleeves as the installation requires. Before you start, check the owner's manual for the correct brake fluid, and plan to use brake component lube during reassembly, as the manufacturer's install list recommends. Searchers looking for a 03-08 Ram 3500 brake hardware kit, H759K caliper clip replacement, or stainless brake hardware for a Dodge HD front or rear brake job will find this kit matches that need.
According to the manufacturer, hardware sets are matched to the application and can contain stainless steel abutment clips, anti-rattle clips, piston clips or bushings, and sleeves as needed for installation.
The manufacturer lists brake fluid as specified in the owner's manual and brake component lube as items needed for a brake job.
The manufacturer states its kits include a new pin bushing kit where the application requires one. Confirm the contents of this specific kit against the manufacturer's fitment information before installing.
Installation follows a standard pad and rotor job: support the truck securely, remove the caliper, replace the hardware clips and bushings in the caliper bracket, and reassemble. Use the brake fluid specified in the owner's manual and apply brake component lube to the contact points as directed. Before disassembly, compare the parts in the box against the old hardware so you know which clips and bushings you are replacing.
