The Eibach Pro-Truck Coilover 2.0 is a pre-assembled front coilover pair for the 2015-2020 Ford F-150 2WD. The manufacturer builds it around an extended-travel monotube damper with nitrogen-filled variable force valving, a 46mm piston, and anodized 6061-T6 billet aluminum mounts, paired with its ERO off-road race spring. A threaded spring perch lets you fine-tune front height and add preload for heavier loads like a steel bumper, winch, or sliders. This makes it a practical 2WD F-150 lift coilover for buyers who want a true off-road setup rather than a basic leveling spacer.
Compared with stock front struts, the appeal is control on rough ground without giving up everyday ride. Owners on user forums say the ride feels firmer than stock but more composed over bumps, though one owner reported that running the preload high cut front droop noticeably. Each unit is individually dyno tested, and the bushing system is cycle tested, which is the durability argument against cheaper coilover alternatives. Installation is a bolt-on front swap, and owners on user forums report about 45 minutes per side with the right tools. Plan to set your ride height deliberately and verify alignment afterward.
This listing covers the front coilover pair only. The manufacturer offers rear sport shocks as part of a separate Stage 2 package for this truck.
This part is listed for 2015-2020 trucks. Owners on user forums report that 2021-and-newer trucks have different geometry and were handled with separate Eibach kits, so confirm fitment by model year before ordering.
Because the coilovers arrive pre-assembled, you do not need a separate spring compressor or extra parts for the front swap. Owners on user forums report that the front takes roughly 45 minutes per side if you have the right tools. Ride height is set by turning the threaded spring perch, and owners recommend adjusting when the coilovers are warm, since they are easier to turn than when cold. Expect the supplied wrench to be a weak point: one owner on a user forum reported breaking it, so use it carefully or bring a sturdier tool.
