The Borla 140312 is a quad-tip cat-back exhaust for the 2.5L turbocharged four-cylinder in 2008–2014 Subaru Impreza WRX STI and 2011–2014 WRX hatchback models with manual transmission. The manufacturer's design steps the 3-inch front pipe down to a single muffler feeding dual 2.25-inch pipe, then finishes with 3.5-inch polished tips. That larger-diameter path is the main reason to choose it over stock piping, which the manufacturer says it upsized from 2.5 to 3 inches. The manufacturer markets the system for added horsepower and torque, though it does not publish a numeric gain. Borla also backs its Subaru WRX STI exhaust systems with a million-mile warranty, a durability promise that budget cat-backs rarely match.
Fitment is where buyers need to be careful. The manufacturer's listing for this part number is for the hatchback body, and its sedan cat-back uses a different part number, 140418. Published fitment tables for this part vary, so confirm your year and body style against the manufacturer before ordering. Downpipe compatibility also varies across sources, so check whether your front section requires an adapter. Searchers looking for a 3-inch WRX STI hatch cat-back, a bolt-on quad-exit S-Type system, or a 2011 WRX hatch cat-back with dual rear exit will find this listing relevant. Borla's install sheets for related Subaru WRX cat-backs call for a 3/8-inch ratchet, 12, 14, and 15mm deep sockets, a pry bar, and penetrating lubricant on hangers and isolators, and they recommend a professional installer.
The manufacturer lists part 140312 for the hatchback body. Its sedan cat-back is a different part number, 140418, so confirm your body style before ordering.
Details vary across sources on downpipe compatibility. Confirm with the manufacturer whether your front section needs an adapter before purchasing.
The manufacturer offers a million-mile warranty on its Subaru WRX STI exhaust systems.
Borla's install sheets for related Subaru WRX cat-backs recommend that an exhaust shop or professional installer handle the job, and list a 3/8-inch ratchet, a 6-inch extension, 12, 14, and 15mm deep sockets, a pry bar, and spray lubricant. Those sheets cover sibling part numbers, not 140312 itself, so check the manufacturer's current guide for this part. Lubricate the hangers and rubber isolators before removing the factory hardware, since seized rubber and rusted bolts are the most common frustrations on this platform. Plan on a rear-section install with a lift, and confirm downpipe compatibility before you start.