The Dinan Supplemental Ride Quality & Handling Kit (D193-0938) is a set of four progressive-rate bump stops for the fifth-generation Toyota GR Supra A90 and A91. Dinan designs them to work with its matched lowering springs, so a car lowered on those springs keeps usable compression travel, according to the manufacturer. The kit targets the abrupt bottoming-out that can occur on a lowered Supra, and the manufacturer says the stops also help preserve ride quality and grip. Owners searching for a GR Supra A90 bump stop upgrade or a lowered Supra handling kit will find this is a tuned match for Dinan springs, not a generic rubber stop.
Dinan says the springs and this kit should be bought and installed together. The manufacturer states that a buyer who skips the kit may get poorer ride quality and handling, and that handling complaints tied to skipping the kit fall outside warranty coverage. Buying a cheaper, untuned bump stop may leave the spring rate and travel mismatched. Because this kit is priced well below the spring set, it is a relatively low-cost way to complete a Dinan suspension package on a 2.0T or 3.0T GR Supra.
Installation is a bolt-on job, but the manufacturer lists about 7.9 labor hours, including a wheel alignment, when the kit is installed by itself. That time is negligible if the kit goes in alongside the Dinan spring set. Dinan's launch materials list 2020-2023 A90/A91 3.0T and 2021-2023 A90 2.0T applications, while its current product page lists 2020-2026, so confirm your year before ordering. Some Dinan parts are not legal for sale or use in California and similar states.
The manufacturer states the bump stops are tuned for Dinan springs and recommends installing them together. It also notes that handling complaints from running the springs without this kit are not covered under warranty.
The manufacturer notes that some of its parts are not legal for use in California or other states with similar regulations. Confirm the status of this specific part with the manufacturer before ordering if you live in one of those states.
Per the manufacturer, installing this kit alone takes about 7.9 labor hours, and that figure includes a wheel alignment, so plan for an alignment appointment or equipment afterward. Installation time drops to negligible when the kit goes in during the same job as the Dinan spring set, which is the most efficient way to do it. Work on the car with proper jack stands and standard hand tools, and confirm the bump stop positions before reassembling the suspension.