Free Shipping on Orders Over $99  ·  No Code Needed

EBC 03-05 Mazda 3 2.3 GD Sport Rear Rotors

*Photo may not represent actual product

The EBC GD1315 is a rear brake rotor from EBC's 3GD Sport line: a one-piece, dimpled and slotted solid disc sized for the rear axle of the 2.3L Mazda3. Compared with a stock rear rotor, the wide slots are designed to sweep pad dust and gas out of the contact area and help the disc shed heat during repeated hard stops, which matters on canyon runs, autocross, or any session where brake fade starts to show. Blind dimples instead of through-drilled holes are a deliberate design choice meant to reduce the cracking risk that comes with fully drilled rotors. For drivers who want rear braking to keep pace with a sportier front setup, this is a straightforward, bolt-on upgrade over a worn or stock rear disc.

Owners on user forums list the 2.3L rear rotor at 280mm (11.02 in), while the 2.0L uses a smaller 265mm rear, so match engine size before ordering. Listings disagree on year coverage, with some showing 2004-2013 Mazda3 applications and others a narrower 2003-2005 range, so confirm fitment with the manufacturer using your VIN or exact model year. Searching for EBC GD1315 rear rotors, Mazda3 2.3 280mm slotted rotors, or 2.3L Mazda3 rear brake upgrade will bring up this exact part. The rotor sits behind the caliper bracket, so the job is a standard rear pad-and-rotor swap that most home mechanics can handle with basic hand tools.

  • Position: Rear
  • Rotor style: Dimpled and slotted
  • Vane design: Solid
  • Diameter: 280 mm (11.0 in)
  • Lug pattern: 5 bolt holes
  • Application: 2.3L Mazda3 (year range varies by listing, confirm before ordering)

FAQ:

Will the GD1315 fit a 2.0L Mazda3?

Owners on user forums report that the 2.0L rear rotor is 265mm, compared with 280mm on the 2.3L. Because of that size difference, match the rotor to your engine. Confirm final fitment with the manufacturer.

Do I need to remove the caliper bracket to replace the rotors?

Per user forum guides, the rotor is freed by removing the two caliper mounting bracket bolts on the rear upright. Those guides note the bracket can stay in place when only the pads are being changed.

What if the old rotor is stuck to the hub?

Owners on user forums suggest soaking the hub and lug studs in penetrating lube and tapping around the hub with a rubber mallet. Some also thread a bolt into the rotor's threaded hole to push it off the hub.

Installing it yourself

Owners on user forums generally describe this as a manageable weekend job with a jack, jack stands, and hand tools, though not the ideal first brake project. Use a 14mm socket and breaker bar for the bracket bolts, a 7mm hex key for the caliper pin, a flat-head screwdriver for the spring clip (it can pop off with force), a rubber mallet, brake cleaner, and a C-clamp to compress the piston. Clean and grease the slide pins, make sure the rubber cover seats properly, and use anti-seize on the bolts, especially in salted-road areas. Apply moderate pressure to seized bolts to avoid snapping them.

  • MPN: GD1315
  • Manufactured by: EBC
  • Units per SKU: 1
  • In Stock: 1
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$264.67

MSRP / List price
Member Price
Your price after signing in
$264.67
Only 1 left in stock — order soon
Add to Cart:
MPN
GD1315
Manufacturer
EBC
Availability
Only 1 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout