The EBC GD7219 is a rear rotor from EBC's 3GD Series Sport line, a dimpled and slotted vented iron rotor sized for the 2003-2005 Infiniti FX35 3.5 V6. The manufacturer says dimpling lets pad gases escape without through-drilled holes, which it links to rotor cracking. The wide-aperture slots are there to clear gas, dust, and water from the pad face and pull cooling air across the friction surface, which helps reduce fade during repeated stops on a heavy SUV.
Compared with stock rotors, this pattern is built for harder street driving, towing, and spirited back-road use, and it gives a more purposeful look than plain rotors. Cheaper blank replacements don't have the same slot-and-dimple layout, so you give up that degassing and cooling design. Because the rotor is sold as a pair, you can update both rear positions at once. Search terms this part matches include 03-05 FX35 rear rotors, dimpled slotted rear brake rotors, FX35 3.5 rear brake upgrade, and EBC GD Sport rear rotors.
Fitment data varies between sources. The product title specifies 03-05, but some catalogs list wider FX35 years. Confirm your VIN and the manufacturer's application data before ordering.
The manufacturer says dimpling provides pad degassing without through-drilled holes, which it associates with rotor cracking under high heat and stress.
This is a rear brake rotor job that requires safely lifting the vehicle, supporting it on jack stands, and removing the caliper and bracket to access the rotor. Owners on user forums report 19 mm caliper bracket bolts on the rear of the FX35. Plan on a penetrating lubricant for seized fasteners, and clean the hub face before fitting the new rotor. Owners on user forums also note the rotor can be tight on the hub and that a light coat of WD-40 on the rotor-to-hub fit made removal easier. Check runout with a dial indicator before reinstalling the caliper, and confirm all torque values in the factory service manual rather than relying on guesses. Bed in the new rotors and pads gradually after installation.