The EBC GD7126 is a front rotor from EBC's GD Sport (3GD series) line. It is a vented, one-piece iron disc with a dimpled and slotted braking surface, and it is sold as a pair. The slots are meant to clear dirt, dust, and pad gases from the contact area, and the dimpling is EBC's alternative to through-drilled holes, which can crack. For a 2002-2006 Acura RSX 2.0 used on the street or at autocross events, that design is the case for paying more than a plain replacement rotor. The gain is in heat and debris management under repeated stops, not in appearance alone.
Listings disagree on the application window. Some show 2001-2007 RSX, while others show 2002-2006, so confirm fitment against your VIN before ordering. The rotor uses a 5-lug pattern, measures 262mm in diameter with a 21mm new thickness, and is listed for use with stock calipers. Owners on user forums describe GD-pattern slotted rotors as audible at speed, most noticeably with the windows down, so expect some noise, especially during pad break-in. Search terms this part matches include EBC GD7126 RSX front rotors, 01-07 RSX 2.0 dimpled slotted brake rotor, RSX track brake upgrade, and 262mm front rotor.
Sources disagree. Some list 2001-2007 RSX 2.0 applications and others list 2002-2006 RSX. The manufacturer's fitment data should be checked against your vehicle before ordering.
Owners on user forums report that GD-pattern slotted rotors produce an audible chop as they turn, usually most noticeable with the windows down. Some noise during pad break-in is also commonly described.
Owners on user forums say EBC's break-in guidance calls for roughly 200 to 500 miles of moderate driving before full stopping power is expected. Follow the instructions included with your pads.
This is a moderate DIY job for a home mechanic with a jack, two jack stands, and a torque wrench. Owners on user forums recommend a 19mm socket for the lug nuts and suggest breaking the lugs loose before lifting the car. Caliper removal typically uses 12mm bolts, and a 17mm socket is often needed for the caliper bracket. Support the caliper with wire or a hanger so the brake hose is not stressed. A seized rotor can often be freed with penetrating oil and a few firm taps on the hub side. Check the rotor's direction markings before mounting, and clean the hub face so the rotor sits flat. Plan to bed in the pads after installation.