The PowerStop K8843-36 is part of the brand's Z36 Truck & Tow line, built for a 2022-2024 Jeep Grand Wagoneer that tows trailers, hauls cargo, or runs larger tires. The manufacturer describes the Z36 pads as low-dust ceramic reinforced with carbon fiber for severe-duty stopping without sacrificing everyday drivability. Paired with drilled and slotted rotors, the design aims to keep brake temperatures down on long mountain descents, where a heavy SUV with a trailer puts real strain on stock hardware. Searches for carbon-fiber ceramic Grand Wagoneer towing brakes and Z36 drilled slotted rotor upgrades match this application.
Compared with stock pads or a cheaper pad-only swap, the manufacturer positions this kit as a full pad, rotor, and hardware package engineered for heavier loads. It ships with stainless-steel shims meant to keep braking quiet and premium stainless hardware plus a pin bushing kit for a clean install. Owners on user forums are split. Many report better fade resistance and a worthwhile upgrade for towing, while others describe weak cold or wet bite and shorter pad life on heavier vehicles, so setting realistic expectations matters. Proper bedding is essential for consistent performance.
The manufacturer recommends five initial stops from 40 mph to 10 mph without coming to a complete stop, followed by five stops from 35 mph to 5 mph. Expect a resin smell as the brakes heat up, then drive at moderate speeds to let them cool.
The manufacturer says the stainless-steel shims are designed to allow noise-free braking. Owners on user forums report that the pads can make a sandpaper-like sound at low speed with the windows down, so noise may be noticeable in some conditions.
The manufacturer markets the Z36 Truck & Tow kit for towing, hauling, and mountain driving, and highlights the drilled and slotted rotors for long downhill braking. Owners on user forums describe towing improvements but also mixed experiences in cold and wet conditions, so test the brakes gradually after installation.
The manufacturer's install guide is intended as reference only, and its listed tools include a caliper piston compressor or C-clamp, a jack and jack stands rated for the vehicle's weight, wheel chocks, brake lubricant, and brake fluid specified in the owner's manual. Before removing the rotor, check for retaining screws, since some vehicles use them to hold the rotor to the hub. If rust binds the rotor, the guide suggests tapping it with a mallet, alternating sides. Clean the hub and rotor before installation, and torque the caliper bracket bolts to the vehicle's service specifications. Avoid holding the pedal down while the rotors are hot, because that can imprint the pad onto the rotor and contribute to judder.