This Power Stop Z36 Truck & Tow front kit bundles pads, rotors, and calipers for the 2000–2002 Dodge Dakota into one set, so you replace the front assembly as a unit rather than sourcing parts separately. Some owners on user forums describe replacing front pads, rotors and calipers several times on these trucks, which makes a complete kit a practical alternative to rebuilding the original hardware piece by piece. The Truck & Tow name signals a setup aimed at hauling and towing, though the manufacturer's details on pad compound and included hardware were not confirmed in this research.
Fitment is tied to model year. Owners on user forums note that 2003 and later Dakotas moved to 12-inch rotors and dual-piston calipers on a floating bracket, so this 2000–2002 kit should not be assumed to cross over to newer trucks. Owner measurements for 2001 four-wheel-drive Dakotas list a 287mm (11.3") outside rotor diameter, which is a useful check before ordering. Shoppers searching for a 2000 2001 2002 Dakota front brake kit, Z36 truck and tow pads, or an 11-inch Dakota caliper upgrade will find this kit matches those needs.
Owners on user forums report that 2003 and later Dakotas use 12-inch rotors and dual-piston calipers, which differ from the 2000–2002 application. Confirm fitment with the manufacturer before ordering for any other model year.
Owners on user forums list 287mm (about 11.3 inches) for 2001 four-wheel-drive Dakotas. Check the manufacturer's listing against your drivetrain before ordering.
The manufacturer's install sheet and torque specifications were not confirmed in this research, so follow the included instructions and a service manual for your truck. One owner on user forums reported that the caliper pin bolts pulled the threads out of the spindle on 1999 and 2000 trucks, so inspect those threads before torquing. Another owner describes the stock caliper position held by a metal clip shaped like a recurve bow which rests on two posts coming out of the hub, so note how that clip seats before you remove it.