The Power Stop K2119-36 is a front brake pad and rotor kit from the company's Z36 Truck & Tow line, built for the 1990-1999 Jeep Cherokee XJ. It pairs carbon-fiber reinforced ceramic pads with drilled and slotted rotors and includes stainless-steel installation hardware, so the front axle can be refreshed in one purchase. It suits owners who tow trailers, haul loads, or run long mountain grades, where stock friction material is more likely to overheat and fade.
Compared with a stock replacement or a budget pad-only swap, the advantage is matched components. Drilled and slotted rotors help shed heat during repeated hard stops, and stainless-steel pad shims are designed to keep braking quiet under those loads. Because the pads and rotors are sold as a set, you avoid pairing a premium compound with worn stock discs. The manufacturer treats a proper break-in as essential, since it deposits an even friction layer from the pads onto the rotors, so budget time for it before heavy towing.
This is a pad, rotor, and hardware kit without calipers, so your existing front calipers stay in use. Confirm your rotor height and 4WD or RWD configuration before ordering, because fitment details vary across sources. Searches for XJ front brake pad and rotor kit, Cherokee towing brake upgrade, and Z36 ceramic pads are the buyer intent this kit serves. Installation is a practical bolt-on job for a confident DIYer with basic tools, and the stainless hardware is included.
No. This part number covers pads, rotors, and installation hardware. Calipers are not part of the kit, so your existing front calipers are reused.
Yes. The manufacturer describes break-in as critical to brake performance because it establishes an even layer of friction material on the rotors. Follow the manufacturer's break-in instructions before towing or hard braking.
This is a bolt-on front brake job. The kit includes stainless-steel hardware and a pin bushing kit, so you work with the factory mounting locations. Plan on a jack and stands, basic hand tools, and a torque wrench. Confirm rotor height and drivetrain configuration before you start, since a mismatch will stop the install. Refer to the vehicle service manual for torque values, and clean the hub mating surface before mounting the new rotors. Professional installation is an option if you are not comfortable with brake work.