The Power Stop K717 is the front-axle half of the manufacturer's Z23 Evolution Sport system for the 1990–1993 Mazda Miata. It pairs Z23 carbon-fiber ceramic pads with drilled and slotted rotors. The manufacturer positions its Z23 carbon-fiber ceramic pads as an upgrade for everyday cars, trucks and SUVs. For a street-driven NA Miata, the case for this kit over stock is fade resistance on canyon runs, autocross, or the occasional track day. Over a cheaper bargain pad, you get a matched pad-and-rotor package from one manufacturer, with the hardware included.
Installation is a bolt-on job. Premium stainless-steel hardware and pin bushing kit is included for an easy, problem-free installation. Bedding matters as much as the wrenching. The manufacturer's break-in begins with 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession, and it warns against holding the pedal while the rotors are hot, since that can imprint the rotor and contribute to the creation of brake judder. Searches for 1990-193 Miata front brake pad and rotor upgrade, Z23 ceramic pads for NA Miata, and Miata autocross brake bedding procedure match this kit.
The manufacturer offers its Z23 Evolution Sport upgrade with powder-coated calipers as a separate kit, so the standard K717 is best understood as pads, rotors, and hardware. Confirm the contents with the manufacturer before ordering if you need calipers.
The manufacturer's procedure calls for five moderate to aggressive stops from 40 mph to 10 mph without letting the brakes cool, followed by five moderate stops from 35 mph to 5 mph. The manufacturer notes that a resin smell during this stage is normal.
This is a manageable bolt-on for a home mechanic comfortable with front brake work, and the stainless hardware is included. Plan on a full bedding session after installation, since the manufacturer treats proper break-in as critical to performance. Avoid parking with the pedal held down while the new rotors are hot, and check the manufacturer's install guidance and the factory service torque specs before you start, since specific torque values were not confirmed in this research.