The K8184 is a complete rear-axle brake upgrade from Power Stop's Z23 Evolution Sport line, and it ships with two rotors and two sets of carbon-fiber ceramic pads so both rear corners are serviced at once. Power Stop describes the kit as including pads, rotors, and premium stainless-steel hardware for a bolt-on upgrade. The manufacturer credits the compound with added stopping power and a low-dust formula, which matters on a daily-driven RAM 1500 where the rear wheels are a visible part of the truck's look. The rotors are drilled and slotted with a zinc-plated finish, and the drilled and slotted design is meant to run cooler and resist rust and corrosion. Compared with replacing worn factory parts with a loose pad-and-rotor mix, this matched kit is built as one system.
Fitment is the first thing to verify. Coverage for this part is listed inconsistently across sources, and at least one listing excludes the 2019 RAM 1500 Classic, so confirm your exact model year, body style, and trim with the manufacturer before ordering. The rear kit installs into the truck using the factory mounting locations. Install guidance specific to this kit was not confirmed in research, so the general disc-brake steps apply: lubricate the pad backing plate edges and caliper slide surfaces, keep the caliper off its hose, and check rotor runout before final assembly. Owners on user forums say that bleeding the brakes and installing new pads in the same session is cumbersome, so many split the two jobs.
After installation, the bedding procedure matters for consistent braking. The manufacturer's Z23 guidance calls for five moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool, followed by a cooling stage. Searchers looking for a RAM 1500 rear brake upgrade, 6-lug carbon ceramic rotors, or low-dust rear pads for towing and daily driving will find this kit covers those needs without the price of a race-only setup.
The manufacturer describes its Z23 Evolution Sport kits as including pads, rotors, and premium stainless-steel hardware. Confirm the included hardware against the packing list when the box arrives.
Fitment information is not consistent across sources, so the 2019 RAM 1500 Classic and other body-style or trim questions should be checked with the manufacturer before purchase.
Yes. The manufacturer's Z23 break-in procedure calls for a series of controlled stops followed by a cooling stage, which establishes an even friction layer on the rotors.
This is a bolt-on rear job for a mechanic-experienced owner with jack stands, a torque wrench, a C-clamp, and brake fluid on hand. Work on one side at a time so the opposite side remains a reference. Do not let the caliper dangle from the brake hose line. When new rotors are installed, checking rotor runout is recommended, since excess runout can cause brake pulsation. Expect a few pedal pumps to re-seat the pads before driving, and follow the manufacturer's break-in procedure afterward.