The Power Stop K8183-36 is the manufacturer's front Z36 Truck & Tow brake kit for the Ram 1500. It combines Z36 carbon-fiber ceramic pads with drilled and slotted rotors, and the manufacturer says the pad compound is built to handle heavier loads than a typical ceramic pad. The rotors are zinc plated against rust, and the manufacturer says the drilled holes let hot gases escape so the rotors run cooler during extended braking. Compared with stock hardware or a basic ceramic pad swap, owners on user forums report firmer pedal feel and less brake dust, which matters when you tow a trailer, haul a load, or descend a mountain grade.
Fitment is the main variable to verify. Fitment listings disagree on the final model year covered, so confirm your VIN with the manufacturer before ordering. Owners on user forums report running the Z36 pads and rotors on 2018 and 2019 Ram 1500 trucks used for towing. The manufacturer includes stainless hardware, stainless shims, and hi-temp brake lubricant, so a front brake job is mostly a bolt-on. Searchers looking for a Ram 1500 Z36 front brake upgrade, drilled slotted rotors for towing, or low-dust carbon ceramic pads will find this kit fits that need.
No. The manufacturer offers a separate Z36 version that adds powder-coated calipers, so this kit covers pads, rotors, and hardware only.
Owners on user forums generally recommend replacing rotors and pads together, since new pads on worn rotors tend to wear out prematurely.
Owners on user forums describe a front pad and rotor swap as a manageable weekend job, with a 2-hour estimate for the fronts on similar Ram trucks. Watch the rotor retaining screw, which owners report can strip or seize; use a proper torx bit and penetrating oil before you force it. Bed in the pads according to the manufacturer's instructions, and confirm fitment by VIN before you start.