The Power Stop K6985 is a rear-axle upgrade kit for the 2015 Hyundai Sonata, built on the brand's Z23 Evolution Sport platform. It includes cross-drilled and slotted brake rotors and Z23 Evolution Sport high carbon ceramic brake pads, for the rear only. The pads use a low-dust ceramic formula infused with carbon-fiber, which the manufacturer positions as a step up from traditional ceramic brake pads. Buyers looking for a rear carbon ceramic brake kit with drilled and slotted rotors get the pads, rotors, and hardware matched as one set.
Compared with stock pads, the value here is in the combination: dual-layer rubberized shims for quieter stops, premium stainless steel hardware and a high-temp ceramic brake lubricant, and zinc-plated rotors that resist rust. Owners chasing a daily-driver brake upgrade with less dust on the wheels will find the price easier to justify than a full track-oriented setup. Fitment details vary by trim and parking-brake type, so confirm your configuration before ordering this Z23 rear brake upgrade for your 2015 Sonata.
Before the first drive, the manufacturer calls for a bed-in: five moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool, followed by a cool-down drive, and brakes should never be cooled with water. Skipping this step can leave the pad material unevenly deposited on the rotors, so do not treat it as optional.
Owners on user forums report that electronic parking brake rear calipers do not simply press back, and some describe needing a scan tool to retract the piston. Confirm your trim and parking brake type with the manufacturer before ordering, since fitment details vary.
The manufacturer specifies five moderate stops from 35 mph to 5 mph without letting the brakes cool, then a cool-down drive of about five minutes at moderate speed without a full stop. The manufacturer also advises against cooling the brakes with water.
This is a bolt-on rear job for a DIYer, but the parking brake type decides how hard it is. Owners on user forums describe the rear caliper as held by two easily accessed bolts, which makes a standard pad change simpler on manual-brake cars. Plan on a jack and stands, a torque wrench, a piston compressor or C-clamp, and a 14mm socket, since owners report that size is common for this hardware. Clean the caliper rails and hardware slides, then apply the included ceramic lubricant at the pad contact points. Electronic parking brake versions need a retraction procedure, so budget extra time or tools for that case.