The Power Stop K8021-26 is the rear Z26 Street Warrior upgrade set for the 2018-2019 Infiniti Q50, pairing drilled and slotted rotors with carbon-fiber ceramic pads. The manufacturer positions the Z26 line for high-horsepower muscle and modified cars, and says the drilled and slotted rotors paired with the carbon-fiber ceramic pads are meant to shorten stops under demanding driving. For a Q50 owner who wants a firmer rear stop without jumping to a full big-brake setup, this is a bolt-on rear upgrade aimed at spirited street driving and occasional hard use, such as a 2018 Q50 Luxe or Sport rear brake upgrade.
What separates this kit from a plain pad swap is the hardware package. The manufacturer includes stainless-steel installation hardware, zinc-plated rotors, and stainless-steel shims, so the rear axle gets matched components instead of parts bought one at a time. Drilled and slotted faces help shed heat and gas during repeated hard stops, which is where a standard rotor is most likely to fade. Carbon-fiber ceramic pads are a step up in friction material for owners who want less dust than a semi-metallic pad while still getting more bite than stock.
No. This is the pads-and-rotors version. The manufacturer also offers a separate Z26 kit with powder-coated calipers if you want new calipers included.
Owners on user forums say the rotor has a threaded hole that accepts a bolt, which can be used to push the rotor off the hub. Some rotor-to-hub corrosion may need penetrating oil or a light tap.
Owners on user forums warn that the rigid brake line running to the caliper can bend if the caliper is allowed to hang or is pushed around. Support the caliper and avoid stressing that line.
Owners on user forums describe the rear job as manageable for a home mechanic with some brake experience. Plan on a jack, jack stands, a breaker bar or impact wrench for the caliper bracket bolts, and sockets for the caliper bracket and guide pin bolts. Owners on Q50 forums report that the rear caliper bracket bolts are 19mm and the guide pins are 14mm on earlier generations, so confirm sizes for your year before starting. Compress the caliper pistons before removing the old pads, and do not let the caliper hang from the hard line. Torque specs were not confirmed during research, so check the service manual or the manufacturer's install sheet before final tightening.