The Power Stop K137 is a front-axle upgrade built on the brand's Z23 Evolution Sport platform. Its drilled, slotted and zinc plated rotors come with dual-layer rubberized shims, premium stainless-steel hardware, and hi-temp brake lubricant. The carbon-fiber ceramic pads use a low-dust ceramic formula infused with carbon-fiber, and the rotors carry a silver zinc dichromate plating that resists rust and corrosion.
Versus stock pads, the case for this kit rests on the pad compound and rotor cooling. Owners on user forums describe how little dust this kit produces, and one who had run OE and aftermarket pads said the ceramics beat them all. Those same forums flag trade-offs: one owner found the rotors wore out extremely fast under heavy off-road use, and another reported rotor corrosion after two years in a salt-heavy climate. Buyers in wet, salted winter regions should plan on regular rotor inspection.
No. The K137 is the pad, rotor and hardware kit. The manufacturer's caliper-inclusive version, with powder-coated calipers, is listed separately as KC137.
Owners on user forums associate this kit with 2003–2009 4Runners that have 12.56-inch (319 mm) front rotors. Measure or check your front rotor size before ordering, since 4Runners in this range were not all built with the same front brakes.
Owners on user forums report that drilled and slotted rotors perform well on pavement but can wear quickly when the vehicle sees heavy off-road use. Buyers who spend much of their time on trails should expect shorter rotor life.
This is a bolt-on front swap that the manufacturer says requires no modifications, so a home mechanic with basic hand tools can handle it. Owners on user forums point to 12 mm, 17 mm and 19 mm sockets for the brake hardware. Reported caliper bolt torque values vary between sources, so confirm specs against the manufacturer's installation guide before final tightening. A common gotcha is caliper piston retraction: one owner advises spreading the caliper fully before reinstalling the new pads, and fitting a clean, lubricated pad set helps the pads seat smoothly. Break in the new pads and rotors according to the manufacturer's instructions before aggressive driving.