The Power Stop K2327 is a front brake upgrade kit for the 2001-2006 Lexus LS430, built on the brand's Z23 Evolution Sport platform. It pairs carbon-fiber ceramic pads with drilled and slotted rotors, so you get a matched pad-and-rotor set rather than sourcing each part separately. Compared with stock, the drilled and slotted rotors are meant to help shed heat during repeated stops, and the carbon-fiber ceramic compound is aimed at a cleaner, quieter daily driver. Choose it over a basic ceramic replacement if you want a sportier pedal feel and better heat management without changing the hydraulic system.
Fitment is the first thing to check: the manufacturer lists this kit for the 2001-2006 LS430 at the front axle, so match the model year and position exactly. The job is a practical driveway project for an owner with basic hand tools, and owners on user forums report that a front swap takes roughly an hour once you have done it before. Rust between the rotor and hub is the most common snag, so clean the hub face before fitting the new rotor. Search terms this kit targets include 2001-2006 LS430 front brake kit, Z23 carbon ceramic pads, drilled and slotted LS430 rotors, and LS430 front brake upgrade.
The manufacturer lists K2327 for 2001-2006 LS430 vehicles at the front position. Match year, model, and axle position before ordering, since the manufacturer's application list is keyed to those conditions.
The manufacturer also offers a separate Z23 Evolution Sport kit that includes powder-coated calipers. Check the part number to confirm which version you are buying.
Owners on user forums suggest bedding in new brakes, noting that fingerprints and oil transfer easily onto fresh rotor surfaces. Follow the manufacturer's bedding guidance where provided.
Plan on a moderate, beginner-friendly job for a front axle. Owners on user forums list a 19mm ratchet, a tire iron, a jack and jack stands, a heavy hammer, and a pry bar as the core tools, plus WD-40 for seized rotors and threadlocker for caliper and wheel-stud fasteners. Support the caliper so it does not hang from the brake hose. Rotors can stick to the hub from rust, so spray penetrant and tap the hub lightly rather than the rotor's friction surface. When you compress the pistons, press them back evenly with an old pad or a C-clamp, and note pad orientation and the retaining springs before removal. Confirm torque values in the factory service manual before reassembling.