The Baja Designs S1 Single Rock Guard in Amber (part 388002) is a protective shield for the front lens of S1 series LED lights. The manufacturer makes it from hard-coated polycarbonate and sells it individually, so each light needs its own guard. Because the cover tints the beam, you can switch an S1 light to amber without changing the bulb or light pod. The manufacturer presents that amber output as a visibility aid in dust and bad weather. Owners on user forums say the snug fit protects the whole lens, though some report the guard is stiff to pull off. Searches for S1 rock guard amber, Baja S1 lens cover, and S1 light protection for trail riding point to this exact part.
The manufacturer lists this guard as universal across S1 models, but it is not compatible with flush-mount S1 housings, so confirm your light style before ordering. Installation is a snap-fit that the manufacturer describes as quick to fit and remove. The manufacturer also notes that the black version of this guard should not be used while the lights are on, so the amber version is the choice if you plan to run the lights while the guard is installed. For a rock guard that protects the light without costing you output, this amber option is a practical upgrade over running bare lenses on an off-road light.
No. The manufacturer states that this rock guard is not compatible with flush-mount models, so check your light housing style before ordering.
Yes. The manufacturer says the amber version lets you switch your S1 lighting to amber for improved visibility in dusty or adverse weather.
The amber version is the one to choose for that purpose. The manufacturer notes that only the black version should not be used while the lights are on.
The manufacturer describes this guard as a snap-fit design that is easy to put on and take off for routine maintenance, so it is generally a quick job without any special equipment. Owners on user forums report that the fit is tight and can be hard to remove, so work the edges gently rather than prying at one corner, which could crack the guard. I did not locate a manufacturer install sheet specific to part 388002, so confirm the mounting steps with the manufacturer before you start.
