RaceQuip's black drag race window net, part 729005RQP, is an angled ribbon-style barrier sized for funny car cages: 24" H Left Side to 18" H Right Side X 23" Wide. Nylon thread holds together one-inch polypropylene straps, and jig-built construction technique keeps each net's dimensions consistent. The net is SFI 27.1 Rated, so it carries a certification that a generic mesh panel cannot offer.
The angled bottom edge follows the sloped geometry of a funny car cage, where a plain rectangle would leave gaps. Width is adjustable: the manufacturer states that the net can be narrowed by removing rows from either edge, with the certification tag sitting mid-panel. That flexibility lets one purchase cover more than one opening, which justifies the price over a fixed-size stock net.
Measure the opening at both ends before ordering, because the 24-to-18-inch taper has to match your cage's layout. Shoppers searching for a 729005RQP funny car window net, an SFI 27.1 angle bottom drag net, or a trimmable 24 x 18 x 23 drag race window net will find this model fits those needs.
Yes. The manufacturer says the SFI tag is placed in the center so rows can be trimmed off either side, making the net narrower for a funny car type rollcage.
The manufacturer states the SFI 27.1 certified ribbon window net is available in black, red, and blue. This listing is the black version.
Trimming is the main hands-on step with this net. Because the certification tag sits in the center, remove an equal number of rows from each edge so the net stays centered on the opening, then re-measure before final fit. Keep the tag on the net after trimming. Mounting hardware, installation difficulty, and required tools were not confirmed on the manufacturer's site, so check the mount kit instructions and confirm bar lengths against your cage before installing.