Free Shipping on Orders Over $99  ·  No Code Needed

H&R 2019+ Volkswagen Jetta S/SE/SEL MK7 DR Wheel Spacer Bolt (Pair) 57.1 CB 5/112 BP 10.0mm Width

*Photo may not represent actual product

The H&R 2055577A is a 10mm DR-series wheel spacer sold as a pair for the 2019-and-newer Volkswagen Jetta MK7 S, SE and SEL. The manufacturer's application listing pairs this 10mm DR spacer with a 5x112 bolt pattern, a 57.1mm center bore and a 14x1.5 thread. The spacer mounts between the wheel and the axial hub, so the wheel sits outboard without any wheel modification. Buyers searching for a 10mm 5x112 57.1 Jetta MK7 front spacer, or a model-matched 2019 Jetta SEL stance kit, get a bore-matched part instead of a universal spacer that has to be made to fit. Owners on user forums typically describe 10mm in front as the setting that brings the wheel flush on factory wheels. Keep in mind that one owner on user forums reported the steering lock pushed the fender lip outward on 10mm fronts until the fenders were rolled.

Owners on user forums also stress that front spacers should be hubcentric, so check the wheel's center bore before buying. Use this spacer for stance and tire clearance on the MK7 platform, not as a way to fit very wide wheels that would need more offset correction. Plan the install around the bolts: the manufacturer states that all DR-series systems require longer wheel bolts. Keep your existing wheel bolt length in mind as well, because the protruding length of the stock bolt past the rim must be shorter than the spacer's width. Searches for 14x1.5 DR spacer bolts, Jetta MK7 wheel spacer install and 10mm spacer fender rub are the questions this part answers.

  • Manufacturer Part Number: 2055577A
  • Vehicle Fitment: 2019+ Volkswagen Jetta S, SE and SEL (MK7)
  • Spacer Series: DR (fits between wheel and hub, requires longer wheel bolts)
  • Spacer Thickness: 10mm
  • Bolt Pattern: 5x112
  • Center Bore: 57.1mm
  • Thread Size: 14x1.5
  • Quantity: Pair (2 spacers)

FAQ:

Do I need new wheel bolts with this spacer?

The manufacturer states that DR-series spacers need longer wheel bolts because the spacer adds thickness between the wheel and the hub. Details on whether bolts are included with this specific part vary, so confirm with the manufacturer before ordering.

Which Jetta years does this spacer fit?

The manufacturer's application listing covers the Jetta MK7 S, SE and SEL from 2019 onward. Fitment should still be confirmed against your exact trim and wheel setup.

Installing it yourself

This is a moderate DIY job that needs a jack, jack stands, a socket set and a torque wrench. Lift the car safely, remove the wheel, and clean the hub face so the spacer seats flush against it. Remove the wheel bolts and the wheel before fitting the spacer. Install the spacer, then hand-turn the new longer bolts so they spin in freely and do not cross-thread. Snug the bolts in a star pattern and finish with a torque wrench set to the wheel manufacturer's specification, following the same star sequence. Recheck torque after a short drive.

  • MPN: 2055577A
  • Manufactured by: H&R
  • Units per SKU: 1
  • On Order: 1
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$149.95

MSRP / List price
Member Price
Your price after signing in
$149.95
Add to Cart:
MPN
2055577A
Manufacturer
H&R
Availability
Out of Stock
Ships Within
1–2 Business Days
Member Pricing
Easy Returns
Expert Support
Secure Checkout