The Dinan D210-2035 is a set of two 5mm wheel spacers, CNC-machined from 6061 aluminum and finished in black anodize, for 5x120 hubs with a 72.6mm center bore. The manufacturer describes spacers as moving the wheel further from the hub, which changes offset for a more aggressive stance or adds room for larger brake calipers. Dinan's installation sheets say its spacers are developed specifically for its own wheel fitments to avoid the balance problems associated with universal spacers. That matters for a track or spirited-driving build, where an unbalanced wheel shows up as vibration at speed.
Dinan's own BMW M4 and M5 spacer listings include this part number, so it is aimed at 5x120 BMW applications. The manufacturer's application guide pairs 5x120 hubs on E chassis with M12x1.5 lug bolts and on F chassis with M14x1.25 bolts. Its guide also notes exceptions: F9x M5/M8 models use the G chassis 5x112 fitment, so this 5x120 set is the wrong bolt pattern for those cars. Longer lug bolts are required with any spacer and are sold separately. Searches for 5x120 BMW wheel spacers 72.6mm bore, 5mm spacers with M12x1.5 extended lug bolts, or 5x120 spacers for F chassis M14x1.25 studs will lead to this exact part number.
Yes. The manufacturer states that longer lug bolts are required when using wheel spacers, and it sells them separately. Its application guide matches thread size to chassis: M12x1.5 for E chassis and M14x1.25 for F chassis on 5x120 hubs. Confirm the correct bolt length for your wheel and spacer combination with the manufacturer before ordering.
Not according to the manufacturer's application guide. It notes that F9x M5 and M8 models use the G chassis 5x112 spacer fitment, so a 5x120 set like this one does not match those cars. Confirm vehicle-specific fitment with the manufacturer before purchasing.
Installation is a bolt-on job for a home mechanic with a torque wrench, a lug wrench, and secure jack stands. Dinan's installation sheets warn against working under a vehicle supported only by a jack. Mount each spacer on the hub so it sits flush and centered, then fit the longer lug bolts for your chassis thread size. Keep front and rear lug bolts separate, because mixing them up is a common mistake when wheels come off. After installation, check that the tire and rim have adequate clearance from suspension and brake components. Confirm the correct torque specification for this exact spacer with the manufacturer before tightening, and re-check lug torque after the first few drives.