Part 80339 brings BAK's Revolver X4s design to the 2021-2026 Ford F-150 and F-150 Raptor, 2022-2026 F-150 Lightning with a 5'7" bed. The roll-up design opens the full bed in seconds and closes it back up under a locked, slash-resistant cover.
The Revolver X4s is BAK's most secure do-it-all hard roll-up, with Level-3 slash resistance, a seamless matte vinyl surface and a low profile.
The F-150 bed does a lot of different jobs. A hard cover protects the cargo on the way, and opens fully for the jobs that need the space.
Slash resistant and locked by default. Patented rotational locking rails and automatic slam latches work with the aluminum slat design to resist prying, slicing and forced entry.
A close fit to the rails. The roll-up sits nearly flush with the bed rails, with flush-fitting side seals and a bulkhead seal built in to resist leaks and dust.
Aluminum slats under one-piece vinyl. Patented interlocking aluminum slats sit beneath a seamless, aluminum-reinforced TriShield 70-grade vinyl surface with a matte finish that resists dust and stains. The slats support up to 400 lb of evenly distributed weight.
Roll it back and the whole bed is yours. Safety straps secure the rolled cover, and it stays clear of the rear window and factory cameras while you drive. There are no panels to prop up or stow.
With a five-year limited warranty behind it, the BAK 80339 is a secure, full-access roll-up for your truck. Order it from Track Ready Products and match the bed length above before checkout.
The mounting is clamp-on with no drilling, the kit ships with the cover, and the install typically takes under an hour with hand tools.
Wipe down the rails, seat the cover, then snug the clamps a little at a time on both sides so it pulls down square. Test the latch and the open and close action while the bed is still empty.
Care is simple: mild automotive soap and water for cleaning, a clamp check after about a week and periodically afterward, the cover secured whenever the truck is moving, and snow and ice cleared before you open it.
