The BAK BAKFlip MX4 EZ-Lift (MPN 450446) is a hard folding tonneau cover for the 2024-2026 Toyota Tacoma 5-foot bed. It is the newest EZ-Lift model in the MX4 line, and the manufacturer, RealTruck, describes it as keeping the same low-profile matte-black aluminum design while adding smoother operation and improved security. A torsion spring at the cab side, an oversized paddle latch, and assisted opening make it fold up and out of the way with one hand, so you get full bed access for long or bulky loads without removing the cover.
The manufacturer rates the EZ-Lift lift force at 10.5 lbs, compared with nearly 30 lbs for heavier covers, which makes it worth the premium for anyone who opens the bed several times a day. Its auto-latch engages when the cover closes, and the manufacturer says the design does not block the third brake light in any position. Warranty coverage is a 5-year limited warranty against defects in materials or workmanship. Owner reports on user forums are generally positive about the MX4 generation's durability, though opinions vary by model year, so check the current build details with the manufacturer before you buy.
The manufacturer states that the MX4 EZ-Lift does not block the third brake light in any position.
The manufacturer says the cover installs with a bolt-on process using the included tight-fit clamps, and no cutting, trimming, or drilling is required.
The manufacturer lists a 5-year limited warranty against defects in materials or workmanship. The warranty covers the original purchaser and is void if the cover is damaged in an accident or improperly installed.
The manufacturer describes a bolt-on installation with all necessary hardware included, and says most installs finish in 30 minutes or less. Owners on user forums report closer to two hours on a first install and recommend a helper to align the rails and position the panels. Recommended tools include a 9/16" wrench or socket, with a 7/8" drill bit optional. Clean the bed rails before mounting, since wax or spray-in liner overspray can affect clamp grip. The manufacturer's MX4 install sheet notes that some drop-in bedliners may need trimming at the corners to fit the rail. If your truck has no drop-in liner, install the cab bulkhead weather strip, after wiping the painted surface with isopropyl alcohol. Some owners have also reported a stubborn factory bolt when removing a rail, so keep a spare socket handy.
